Does anyone know where this function is implemented?
I've looked at all the scripts in /etc/init.d/, in the initrd (/linuxrc, /etc/init, etc).. but
cannot locate it anywhere. Specifically, what generates that blue screen
that says:
Knoppix has found an image file. Please
be aware of the potential security risk of such configuration images,
because of scripts that can...
Acknowledge image activation by selecting OK. If you do nothing, the
system will boot normally (without image activation) in 20 seconds
KNOPPIX-CONFIGURATION
x home Mount persistent knoppix-homedirectory
x system Add as persistent, writable system area
x overwrite overwrite/update stored system configuration in image
x init start INIT-bootscripts (network, printer, etc.)
I understand the purpose of the screen and the options, I just cannot
locate where this is all implemented. Can anyone shed some light on this?
UCSC-RAID-M5 CISCO 12Gb/s SAS HBA Raid Controller w/Battery & Cable
$69.99
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$54.66
Dell EMC 092GD6 Broadcom 9305-16i LSI Quad Port 4 Port SAS RAID Controller
$84.99
ORICO 5 Bay Raid USB3.0 to SATA External Hard Drive Enclosure for 3.5'' HDD LOT
$134.39
Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 4Y5H1 High Profile
$15.99
LSI 8 Port 6Gbps PCIe 3.0 External SAS RAID Card w/ 1GB CacheVault & Low Profile
$29.00
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
Cisco UCSC-MRAID12G-1GB 12Gb/s SAS RAID Controller 74-12862-02 card w/ Battery
$15.99
Yottamaster 2 Bay RAID Hard Drive Enclosure USB 3.1 For 2.5" SATA HDD SSD UASP
$56.25
Yottamaster 5 Bay RAID Hard Drive Enclosure Type-C B For 2.5" 3.5" SATA HDD SSDs
$131.59