Does anyone know where this function is implemented?
I've looked at all the scripts in /etc/init.d/, in the initrd (/linuxrc, /etc/init, etc).. but
cannot locate it anywhere. Specifically, what generates that blue screen
that says:
Knoppix has found an image file. Please
be aware of the potential security risk of such configuration images,
because of scripts that can...
Acknowledge image activation by selecting OK. If you do nothing, the
system will boot normally (without image activation) in 20 seconds
KNOPPIX-CONFIGURATION
x home Mount persistent knoppix-homedirectory
x system Add as persistent, writable system area
x overwrite overwrite/update stored system configuration in image
x init start INIT-bootscripts (network, printer, etc.)
I understand the purpose of the screen and the options, I just cannot
locate where this is all implemented. Can anyone shed some light on this?
IBM LSI SAS9220-8i M1015 46M0861 SAS/SATA PCI-e RAID Controller Both brackets
$139.00
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
XDHXT DELL PERC H710P 6Gbps 1GB PCI RAID CONTROLLER 0XDHXT
$59.00
HPE 869102-001 Smart Array E208i-a SR Gen10 Storage Controller RAID SP: 871039
$129.99
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$35.96
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$86.99
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
Yottamaster 5 Bay RAID Hard Drive Enclosure USB3.1 Type C 2.5"/3.5" SATA HDD SSD
$142.49
Dell PCIe M.2 Boss S1 RAID Controller Card 7HYY4 with 2x 240GB SSD
$94.99