turn off aps
Use alsaconf in root
read follow directions
choose emu10k1x card wait for configuration
ok/yes on all dialogs
check alsamixer or kmix
for adjustments
see lsmod and look at the setup - sweeet huh
I recently decided to try the live Knoppix 4.0.2 CD. Upon booting, all looked OK, including the installation of the sound card module (reported that emu10k1 was installed). Then, an error message immediately followed about an error with sound_slot_0. I searched all of the forums, tried their solutions (including rmmod, modprobe; cheatcode knoppix alsa, running alsa-autoconfig, etc). Then I noticed that for the first time, the SMP kernel (2 penquins at top of boot screen, right?) was selected at boot time on this HT P-IV. I suspect that alsa is not included in the SMP kernel, so that the sound card will never work.
Could someone please confirm if alsa is included in the SMP kernel, and suggest a workaround? I've searched the forum, Google, and linuxquestions for help, but haven't found any. For instance, are there cheatcodes that could force a single processor kernel to be used, or force alsa or oss to be loaded from the live CD?
lspci -v output
0000:00:00.0 Host bridge: Intel Corp. 82875P Memory Controller Hub (rev 02)
Subsystem: Dell: Unknown device 0157
Flags: bus master, fast devsel, latency 0
Memory at e0000000 (32-bit, prefetchable) [size=128M]
Capabilities: <available only to root>
0000:00:01.0 PCI bridge: Intel Corp. 82875P Processor to AGP Controller (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, fast devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe900000-feafffff
Prefetchable memory behind bridge: e8000000-f7ffffff
0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell: Unknown device 0157
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at ff80 [size=32]
0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell: Unknown device 0157
Flags: bus master, medium devsel, latency 0, IRQ 10
I/O ports at ff60 [size=32]
0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell: Unknown device 0157
Flags: bus master, medium devsel, latency 0, IRQ 9
I/O ports at ff40 [size=32]
0000:00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell: Unknown device 0157
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at ff20 [size=32]
0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell: Unknown device 0157
Flags: bus master, medium devsel, latency 0, IRQ 5
Memory at ffa80800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <available only to root>
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=03, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe700000-fe8fffff
0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge (rev 02)
Flags: bus master, medium devsel, latency 0
0000:00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra ATA 100 Storage Controller (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Dell: Unknown device 0157
Flags: bus master, medium devsel, latency 0, IRQ 9
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at ffa0 [size=16]
Memory at febffc00 (32-bit, non-prefetchable) [size=1K]
0000:00:1f.2 IDE interface: Intel Corp. 82801EB (ICH5) Serial ATA 150 Storage Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Dell: Unknown device 0157
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 9
I/O ports at fe00 [size=8]
I/O ports at fe10 [size=4]
I/O ports at fe20 [size=8]
I/O ports at fe30 [size=4]
I/O ports at fea0 [size=16]
0000:00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
Subsystem: Dell: Unknown device 0157
Flags: medium devsel, IRQ 3
I/O ports at efe0 [size=32]
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc: Unknown device 3002
Flags: bus master, stepping, 66MHz, medium devsel, latency 64, IRQ 11
Memory at f0000000 (32-bit, prefetchable) [size=128M]
I/O ports at de00 [size=256]
Memory at fe9e0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at fea00000 [disabled] [size=128K]
Capabilities: <available only to root>
0000:01:00.1 Display controller: ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] (Secondary)
Subsystem: ATI Technologies Inc: Unknown device 3003
Flags: bus master, stepping, 66MHz, medium devsel, latency 64
Memory at e8000000 (32-bit, prefetchable) [size=128M]
Memory at fe9f0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <available only to root>
0000:02:01.0 Multimedia audio controller: Creative Labs [SB Live! Value] EMU10k1X
Subsystem: Creative Labs: Unknown device 1003
Flags: bus master, medium devsel, latency 64, IRQ 10
I/O ports at cf20 [size=32]
Capabilities: <available only to root>
0000:02:01.1 Input device controller: Creative Labs [SB Live! Value] Input device controller
Subsystem: Creative Labs: Unknown device 1003
Flags: bus master, medium devsel, latency 64
I/O ports at cf08 [size=8]
Capabilities: <available only to root>
0000:02:02.0 Modem: Broadcom Corporation BCM4212 v.90 56k modem (rev 02) (prog-if 00 [Generic])
Subsystem: Dell: Unknown device 0002
Flags: bus master, fast devsel, latency 64, IRQ 3
Memory at fe8fe000 (32-bit, non-prefetchable) [size=4K]
I/O ports at cf10 [size=16]
Capabilities: <available only to root>
0000:02:03.0 PCI bridge: Texas Instruments PCI2050 PCI-to-PCI Bridge (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, medium devsel, latency 64
Bus: primary=02, secondary=03, subordinate=03, sec-latency=64
Memory behind bridge: fe700000-fe7fffff
Capabilities: <available only to root>
0000:02:08.0 Ethernet controller: Intel Corp. 82562EZ 10/100 Ethernet Controller (rev 02)
Subsystem: Dell: Unknown device 0157
Flags: bus master, medium devsel, latency 64, IRQ 5
Memory at fe8ff000 (32-bit, non-prefetchable) [size=4K]
I/O ports at cf40 [size=64]
Capabilities: <available only to root>
0000:03:05.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
Subsystem: Unknown device 1809:0002
Flags: bus master, medium devsel, latency 64, IRQ 9
Memory at fe7fb800 (32-bit, non-prefetchable) [size=2K]
Memory at fe7fc000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <available only to root>
0000:03:06.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
Subsystem: Unknown device 1809:0003
Flags: bus master, medium devsel, latency 64, IRQ 10
Memory at fe7fb600 (32-bit, non-prefetchable) [size=512]
turn off aps
Use alsaconf in root
read follow directions
choose emu10k1x card wait for configuration
ok/yes on all dialogs
check alsamixer or kmix
for adjustments
see lsmod and look at the setup - sweeet huh
LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module
$74.99
Cisco SFP-10G-SR 10-2415-03 10 Gigabit Transceiver LOT OF 10
$34.94
NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*
$20.00
NEW Sealed Cisco SFP-10G-SR-S 10G-SR 850nm 300m MMF LC SFP+ Transceiver *US Ship
$20.00
Lot of 10 SFP-GB-GE-T Copper RJ45 10/100/1000Base-T 100m Transceiver Modules
$29.92
🔥🔥🔥Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver 10-2415-03 🔥🔥🔥
$8.00
Cisco SFP-10G-SR 10-2415-03 10 Gigabit Transceiver WARRANTY LOT OF 10 @ F
$38.79
Cisco 16Gb Fibre Channel SW SFP+ Transceiver DS-SFP-FC16G-SW
$4.75
New Sealed Cisco SFP-10G-LR 10GBASE-LR SFP Plug-in Transceiver Module
$15.00
HP J9150A 1990-4065 HP PROCURVE 10GbE SFP+ SR TRANSCEIVER
$24.99