Did you boot like this:
knoppix xmodule=s3 Of course you should add any other cheat codes you normally use to boot your machine properly.
I am a new user with Knoppix and like it alot. At this point I just have one question/problem.
X comes up fine in 800x600 resolution. However the consoles seem to have too many lines. What I mean by this is that once I get to the bottom of the LCD screen the screen does not scroll. It seems to be about 10 to 11 lines too long. I figure this by how many times I have to press the enter key to see a prompt after issuing a command that scrolls off the screen. The console displays 37 lines.
I did not see a cheat code that addressed this. I tried the vga=ext code, but it did not help.
Is this a problem due to using the lcd screen? Is there a config option I can set to fix it? The video chip is a s3virge.
Any ideas would be appreciated.
Thanks,
Lou
Did you boot like this:
knoppix xmodule=s3 Of course you should add any other cheat codes you normally use to boot your machine properly.
Using the cheatcode vga=normal solved this. Didn't see this code at first cause it was not in the F2 list. Looked at the text file and found it.
Lou
You'd be amazed at how many people don't ever see that file. Glad you got it fixed.Originally Posted by TheMan
Cisco 2900 Series CISCO2901/K9 v06 Integrated Services Router
$39.99
Cisco Nexus N9K-C92160YC-X 48P 25GbE SFP28 6P QSFP+/QSFP28 PE Switch
$499.00
Cisco WS-C2960X-48FPD-L 48 V07 POE+ GE+2 10G SFP+, LAN BASE 740W w/ C2960X-Stack
$110.00
Cisco Catalyst WS-C2960X-24PD-L GigE PoE 370W, 2 x 10G SFP+, LAN Base H22
$94.00
🔥🔥🔥 CISCO SFP-10G-SR V03 10-2415-03 850nm 10GBASE-SR SFP+ Multi Module 🔥🔥🔥
$6.80
Cisco C9300NM8X Network Switch Module 8 X 10GE
$297.00
GENUINE Cisco SFP-10G-SR V03 SFP+ GBIC Transceiver Module 10-2415-03
$6.80
Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850
$30.99
Cisco WS-C3560CX-12PC-S 12 Port GbE PoE IP Base Catalyst Managed Switch, TESTED
$174.00
Cisco Nexus N3K-C3172PQ-10GE 48P 10GbE 6P QSFP+ Switch N3K-C3172PQ-10GE
$189.00