I have the same problem
It says Initializing Modem but nothing happens
I have Connexant soft 56 K Internal modem
I'm newbie for Linux and Dial Up user..
I've tried to configure my internal 56K modem (ActionTec V.90 PCI Modem) via the modem-assistant. I know my modem not winmodem, it's hardware modem And It use COM PORT=3, IRQ=9 on WinXP)
However it can't find with S2.. I get an answer from the modem on S1 but empty ATI Values.
Anyway, if I dial, the modem stops on "initializing modem".
What's the Problem?
And what can i do?
Thanks in advance..
I have the same problem
It says Initializing Modem but nothing happens
I have Connexant soft 56 K Internal modem
FarAway- as root do this:
setserial /dev/ttyS3 irq 9
ln /dev/ttyS3 /dev/modem
Then configure kppp
$59.99
Seagate Barracuda ST10000DM005 10TB 256MB SATA 6Gb/s 3.5" Internal Hard Drive
$153.99
WD 2TB Certified Refurbished Elements, External Hard Drive - RWDBU6Y0020BBK-WESN
$49.99
WD 1TB Elements SE, Portable External Hard Drive - WDBEPK0010BBK-WESN
$44.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$79.99
Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$93.88
Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive
$99.99
Seagate Exos 7E10 ST2000NM000B 2TB 7200RPM SATA 6.0Gb/s 3.5" Internal Hard Drive
$29.99
HGST 0F27352 10TB 3.5" SAS 7200 RPM 12Gb/s Hard Drive 100% #73 v
$65.00
Western Digital WD10JUCT 1TB 2.5" SATA 3Gb/s 5400 RPM 16MB Laptop Hard Drive
$17.98