I have the same problem
It says Initializing Modem but nothing happens
I have Connexant soft 56 K Internal modem
I'm newbie for Linux and Dial Up user..
I've tried to configure my internal 56K modem (ActionTec V.90 PCI Modem) via the modem-assistant. I know my modem not winmodem, it's hardware modem And It use COM PORT=3, IRQ=9 on WinXP)
However it can't find with S2.. I get an answer from the modem on S1 but empty ATI Values.
Anyway, if I dial, the modem stops on "initializing modem".
What's the Problem?
And what can i do?
Thanks in advance..
I have the same problem
It says Initializing Modem but nothing happens
I have Connexant soft 56 K Internal modem
FarAway- as root do this:
setserial /dev/ttyS3 irq 9
ln /dev/ttyS3 /dev/modem
Then configure kppp
VINTAGE OEM IBM Three-Button ScrollPoint Optical USB Mouse (P/N:24P0494)-Grade B
$13.45
Vintage Apple OEM - IBM WDS-L160 50-Pin SCSI HDD 160MB, Powers On
$32.99
OEM IBM Thinkpad Keyboard 46H3846
$10.00
OEM IBM Lenovo 16V Adapter for Laptop Thinkpad 240 385 390 560 600 765 770 n/PC
$21.99
5M/16ft - LC/LC Fibre Cable 50/125 - IBM OEM - PN 12R9914 EC J14853 OFNP - New
$6.99
IBM DOS 6.1 OEM VERSION 5.25" DISKS NEW SEALED
$24.99
IBM Keyboard T440 T440s T440p T431s Backlit 04X0139 OEM
$24.00
IBM Model M Keyboard Flipper and Buckling Spring - Set of 5 - Genuine OEM
$3.49
Lexmark/IBM 6190653 Black Developer (500k Pages), for the Lexmark 3835 printer
$247.98
IBM OEM DBOA-2720 720MB 2.5" IDE 44-Pin LAPTOP HARD DRIVE HDD Vintage TESTED
$67.90