I have the same problem
It says Initializing Modem but nothing happens
I have Connexant soft 56 K Internal modem
I'm newbie for Linux and Dial Up user..
I've tried to configure my internal 56K modem (ActionTec V.90 PCI Modem) via the modem-assistant. I know my modem not winmodem, it's hardware modem And It use COM PORT=3, IRQ=9 on WinXP)
However it can't find with S2.. I get an answer from the modem on S1 but empty ATI Values.
Anyway, if I dial, the modem stops on "initializing modem".
What's the Problem?
And what can i do?
Thanks in advance..
I have the same problem
It says Initializing Modem but nothing happens
I have Connexant soft 56 K Internal modem
FarAway- as root do this:
setserial /dev/ttyS3 irq 9
ln /dev/ttyS3 /dev/modem
Then configure kppp
Intel Xeon E5-2689v4 10 Core 3.1G - SR2T7
$125.00
Intel - Core i9-12900K Desktop Processor 16 (8P+8E) Cores up to 5.2 GHz Unloc...
$331.99
Intel - Core i7-12700K Desktop Processor 12 (8P+4E) Cores up to 5.0 GHz Unloc...
$242.99
Intel - Core i9-14900K 14th Gen 24-Core 32-Thread - 4.4GHz (6.0GHz Turbo) Soc...
$539.99
Intel 6 Core i5-8600 3.1GHZ Desktop Processor SR3X0
$50.00
Intel - Core i7-14700K 14th Gen 20-Core 28-Thread - 4.3GHz (5.6GHz Turbo) Soc...
$399.99
Intel Core i5-4590S CPU Processor | 3.0GHz | Quad-Core | LGA 1151 | SR1QN
$13.99
Intel - Core i7-13700K 13th Gen 16 cores 8 P-cores + 8 E-cores 30M Cache, 3.4...
$364.99
Intel Core i9-14900K 3.2GHz 24-Cores LGA 1700 CPU Processor (BX8071514900K)
$480.00
AMD Ryzen 7 2700X CPU Processor 3.7GHz AM4
$74.99