I believe there is info about this in the forums so do some searching here, but also you might want to check out this link that I recently found:
http://rz-obrian.rz.uni-karlsruhe.de/knoppix-usb/
Hi,
i´m working on a project to store data with a microcontroller on a MMC/SDC and i think it may be a good idea to put Knoppix in another 128 MB big Partition (the second partition) and boot it via usb with a usb reader/writer.
I´m using mass storage class compatible reader/writer, so the storage cards can be used like scsi drives.
Is 128 MB (and 60 MB swap in another partition) enough for a minimal Knoppix?
Does anyone has experience with Knoppix on storage cards?
I believe there is info about this in the forums so do some searching here, but also you might want to check out this link that I recently found:
http://rz-obrian.rz.uni-karlsruhe.de/knoppix-usb/
Ok, USB Memory Stick is not the same as MMC or SDC but it looks similar. Thanks for the info.
You might also want to check the mailing list archives for debian-knoppix@linuxtag.org I've seen a few post in there about the same idea.
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
Samsung 16GB 2Rx4 PC4-2133P DDR4-17000 1.2V RDIMM ECC Registered Server Memory
$16.29
Samsung 16GB (2x8GB) DDR4 2400MHz PC4-19200 Desktop RAM Memory M378A1K43CB2-CRC
$19.95
HyperX FURY DDR3 8GB 16GB 32GB 1600 MHz PC3-12800 Desktop RAM Memory DIMM 240pin
$12.90
A-Tech 8GB PC3-12800 Desktop DDR3 1600 MHz Non ECC 240-Pin DIMM Memory RAM 1x 8G
$13.99
Corsair Vengeance LPX 32GB PC4-25600 (DDR4-3200) Memory NEVER USED LOOSE STICKS
$40.00
Kingston HyperX FURY DDR3 8GB 16GB 32G 1600 1866 1333 Desktop Memory RAM DIMM
$13.25
TeamGroup 16GB PC4 2666 PC4 21300 DDR4 2666MHz 1.2V CL19 Desktop RAM Memory
$27.95
A-Tech 256GB 4x 64GB 4Rx4 PC4-19200 ECC Load Reduced LRDIMM Server Memory RAM
$287.96
A-Tech 64GB 4x 16GB 2Rx4 PC4-17000R DDR4 2133MHz ECC REG RDIMM Server Memory RAM
$87.96