Just found the problem.
Using the failsafe option boots Knoppix with both Serial ATA drives enabled.
Hello,
I can't boot Knoppix 4.0.2 or 4.0.0 (both DVD-Version). The DVDs should be alright, because they can boot on other systems. Knoppix 3.8, Kanotix and many other Linux-Live CDs or DVDs can boot without any problems.
Does anybody know, if there is a trick to boot or is there an error with the boot loader of Knoppix 4.0.x. The systems hangs when trying to identify the Serial ATA harddrives. When I disconnect the Serial ATA drives the boot-process suceeds and I can log in into Knoppix.
Any hints?
Just found the problem.
Using the failsafe option boots Knoppix with both Serial ATA drives enabled.
i found this problem on my celeron1000. do not know why but version 3.6 and higher, also the STD version do not want to boot here.
Have you tried it with the failsafe option? With that option enabled it worked for me.
Looks like a bug in the auto detection of Knoppix 4.0.x. I have tried many other distributions and no other showed this problem.
yes with failsafe it boots ok, but i think it is not just the 4.0 version , in my case it was also with 3.6 , 3.7 and 3.9
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$712.98
DELL PowerEdge R730XD 24x 2.5" Server Dual 750W Dual Heatsink - BareBones TESTED
$269.99
HP ProLiant DL360 G9 Server 2x E5-2660v3 2.60Ghz 20-Core 96GB P440ar
$304.35
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$79.19
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB
$510.00
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Dell PowerEdge R620 Server 2x E5-2650 V2 = 16 Cores H710P 128GB RAM 2x 600GB SAS
$274.99
HP Proliant DL360 Gen9 1x E5-2620 V3 2.40GHZ 32GB DDR4-1866MHZ 2x 500W PSU
$105.95