Just found the problem.
Using the failsafe option boots Knoppix with both Serial ATA drives enabled.
Hello,
I can't boot Knoppix 4.0.2 or 4.0.0 (both DVD-Version). The DVDs should be alright, because they can boot on other systems. Knoppix 3.8, Kanotix and many other Linux-Live CDs or DVDs can boot without any problems.
Does anybody know, if there is a trick to boot or is there an error with the boot loader of Knoppix 4.0.x. The systems hangs when trying to identify the Serial ATA harddrives. When I disconnect the Serial ATA drives the boot-process suceeds and I can log in into Knoppix.
Any hints?
Just found the problem.
Using the failsafe option boots Knoppix with both Serial ATA drives enabled.
i found this problem on my celeron1000. do not know why but version 3.6 and higher, also the STD version do not want to boot here.
Have you tried it with the failsafe option? With that option enabled it worked for me.
Looks like a bug in the auto detection of Knoppix 4.0.x. I have tried many other distributions and no other showed this problem.
yes with failsafe it boots ok, but i think it is not just the 4.0 version , in my case it was also with 3.6 , 3.7 and 3.9
Intel PCIe SSD AIC RAID Controller Card G97168-252
$44.55
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
Cisco UCS LSI MegaRAID 9271CV-8I SAS2308 PCIe SAS Internal RAID Controller
$28.00
Dell HBA330 12GBPS SAS Internal HBA Controller (NON-RAID) PCIe Card J7TNV 0J7TNV
$40.95
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$87.99
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
4 Bay RAID External Hard Drive Enclosure for 2.5/3.5" SATA HDD/SSD
$79.99
G TECHNOLOGY G RAID 0G04228 2-Bay Thunderbolt 2 RAID Array W/Power Supply
$99.99