I am also currently having this same problem. Hopefully someone has a solution for us on this as i'd really like to get wireless going on this so I can further my knowledge with knoppix...
-Sean
hi, i've already had experience with configuring wireless cards but this time I am defeated...
i've already installed my WG111 on vectorlinux a distro based on slackware, and it worked just fine, but when i try to install it with knoppix it just doesnt work...
i've got knoppix 4.0 and i am running it from live-cd (i dont actually know if this is the cause of my problems)
here's what happens after the installation:
root@0[knoppix]# ndiswrapper -l
Installed ndis drivers:
netwg111 driver present
now, the wireless card is plugged in but it doesnt recognize it,
i should have read something like:
nerwg111 driver present, hardware present
but there is no way to make this happen, and if i run modprobe ndiswrapper obviously nothing happens, while i know that it should bring it on, and the light should start blinking..
i dont know what to do, since it should just work as always...
thanks for your support
I am also currently having this same problem. Hopefully someone has a solution for us on this as i'd really like to get wireless going on this so I can further my knowledge with knoppix...
-Sean
hiya, i am going to be in the same situation, but am yet to get the ndis driver. can you give me any help on how to do this? i am a total newbie and have only just managed to work out how to install packages!
anyway, i have finally installed unshield, which i read here somewhere that i need to extract the ndis driver from the windows driver file. is that correct? if so, how do i do this?
many thanks,
dan
what i have done, is download the latest wg111v2 driver from the netgear website and run unshield on data1.cab.
then go into the winxp folder and
ndiswrapper -i xxxxx.inf
this has worked for me. just to check, you are talking about a usb device here, yes?
dan
Mine is a PCMCIA card.
Which card do you have? The WG111 is a USB device. Visit http://www.netgear.comOriginally Posted by Internexus
I have a wg511 v2. The reason i monitored this thread is b/c im getting the same problem with this device and there was no solution for this card when i searched ; /
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
Dell R630 8SFF 2.4Ghz 20-Core 128GB H730 RAID 10GB RJ-45 NIC 2x750W PSU 8x Trays
$455.04
Dell R740XD2 26LFF 3.6Ghz 8-C 384GB H730P MINI RAID 2x10G SFP+ NIC 2x1100W Rails
$2998.08
Dell R740XD2 26LFF 3.6Ghz 8-C 768GB H730P MINI RAID 2x10G SFP+ NIC 2x1100W Rails
$3538.08
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$87.99
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
4 Bay RAID External Hard Drive Enclosure for 2.5/3.5" SATA HDD/SSD
$79.99
G TECHNOLOGY G RAID 0G04228 2-Bay Thunderbolt 2 RAID Array W/Power Supply
$99.99