-
System hangs when using a ralink based zaapa wireless card
Hi, I'm a complete profane to Linux, so please be patient
I am using Knoppix v4 with an AMD 900 Mhz 512Mb computer. I've got a Zaapa WiFi card installed with Ralink chipset. It seems to be recognized but the first time I try to scan for networks, it won't see anything. If I try for second time, it just gets frozen.
Questions: Is this card supported? Where can I see if Knoppix is recognizing it? (something like system properties in windows) I have found drivers for the card in Internet, but must be compiled and although I have tried to do it, have no clue why it won't work. I'm a bit lost, as you can see...
Thanks a lot for your time.
Dån
-
I have a similar problem when I boot with KNOPPIX_V4.0.2CD-200509-23-EN.
The boot process stops at:
Network device eth0 detected, DHCP broadcasting for IP. (Backgrounding)
Network device eth1 detected, DHCP broadcasting for IP.
I have a ethernet card and a Foxconn Foxconn WLL-3350 PCI Wireless Adapter which
uses a Ralink chipset. It works just fine with Ubuntu 5.10.
I found that KNOPPIX_V4.0.2CD-200509-23-EN does boot if I use the nodhcp cheat code:
boot: knoppix nodhcp
I can see the card in the Info Center.
KDE -> System -> KInfoCenter (Info Center)
then select PCI in the Index tab
reports the card as:
0000:00:0f.0 Network controller: RaLink Ralink RT2500 802.11 Cardbus Reference Card (rev 01)
Subsystem: RaLink: Unknown device 2450
Flags: bus master, show devsel, latency 32, IRQ 11
Memory at d9000000 (32-bin, non-prefetchable) [size=8k]
Capabilities: <available only to root>
I can get it up and runing with:
KDE -> KNOPPIX -> Network/Internet -> Network card configuration
In the Xdialog select "eth1 Netwerkkarte_1"
and Use DHCP broadcast? Yes
After that the nework is up and running as shown by ifconfig and a working Mozilla Firefox.
It looks like there is some silliness in the booting process that prevents the wireless card from working properly.
I also tried KNOPPIX 3.9 and 3.4 -- neither of them recognize the wireless card as a network interface.
George
-
Same problem here when I boot with the KNOPPIX_V4.0.2CD-200509-23-EN.
I have a Ralink wireless card as well, on an Avertec 6100 series laptop.
The boot process stops at:
Network device eth0 detected, DHCP broadcasting for IP. (Backgrounding)
Network device eth1 detected, DHCP broadcasting for IP. (Backgrounding)
I used the cheat-code as mentioned and it goes to the next line before hanging again (boot: knoppix nodhcp):
Skipping DHCP broadcast/network detection as requested . . .
Automounter started for: floppy cdrom.
_
Any other options? Nevermind.
Looked into the tips and triks under the cheat-codes page and entered the usefull option for Laptops with the previous cheat-code and it worked!
boot: knoppix acpi=off pnpbios=off noapic noapm nodhcp
New problem!
Tried to get my wireless going as mentioned in the previous post:
In the KNOPPIX Menu -> Network/Internet -> Network card configuration
In the Xdialog select "eth1 Netwerkkarte_1"
and Use DHCP broadcast? Yes
and after that it says DHCP broadcast fails
So, I tried "eth0 Netwerkkarte_0" and then it just froze up, I thought Linux didn't freeze up completely?
Any solution for me to get my wireless card working?
-
Yes solution is dont use linux at least knoppix or dont use rt2500 chip based card.
If you wanna use unix like system use PCBSD there my rt2500 (Asus wl-107g) card works.
And ubuntu or kubuntu (5.10) linux work well too with my card.
Similar Threads
-
By jbreazeale in forum Hdd Install / Debian / Apt
Replies: 9
Last Post: 08-12-2006, 03:32 PM
-
By DiabloGN in forum General Support
Replies: 3
Last Post: 04-19-2005, 06:22 AM
-
By techz_boy in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 09-02-2004, 06:21 PM
-
By joekrahn in forum Ideas
Replies: 1
Last Post: 02-24-2004, 05:20 PM
-
Replies: 3
Last Post: 11-13-2003, 05:52 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![Gigabyte Z370P D3 ATX Z370 LGA1151 Motherboard (Support Intel 6/7th 8th 9th) picture](/store/img/g/QrkAAOSwMGNmLxf0/s-l225/Gigabyte-Z370P-D3-ATX-Z370-LGA1151-Motherboard-Sup.jpg)
Gigabyte Z370P D3 ATX Z370 LGA1151 Motherboard (Support Intel 6/7th 8th 9th)
$59.99
![MSI H110M pro-vd 6th/7th Gen Intel DDR4 MATX Motherboard NO I/O SHIELD picture](/store/img/g/jNYAAOSwCJdmeF7y/s-l225/MSI-H110M-pro-vd-6th-7th-Gen-Intel-DDR4-MATX-Mothe.jpg)
MSI H110M pro-vd 6th/7th Gen Intel DDR4 MATX Motherboard NO I/O SHIELD
$35.00
![ASRock B550M Pro SE AM4 DDR4 SATA 6Gb/s 1 PCIe 4.0 x16 Micro ATX Motherboard picture](/store/img/g/oXIAAOSwCn1k30lD/s-l225/ASRock-B550M-Pro-SE-AM4-DDR4-SATA-6Gb-s-1-PCIe-4-0.jpg)
ASRock B550M Pro SE AM4 DDR4 SATA 6Gb/s 1 PCIe 4.0 x16 Micro ATX Motherboard
$84.99
![ASUS H110M-R Motherboard Intel 6th/7th Gen LGA1151 DDR4 Micro-ATX i/o shield picture](/store/img/g/FhQAAOSwzL9iDqc3/s-l225/ASUS-H110M-R-Motherboard-Intel-6th-7th-Gen-LGA1151.jpg)
ASUS H110M-R Motherboard Intel 6th/7th Gen LGA1151 DDR4 Micro-ATX i/o shield
$42.00
![Asus H81M-C Intel LGA1150 DDR3 Desktop Motherboard MicroATX Socket H3 picture](/store/img/g/CZ4AAOSwg8pmYirU/s-l225/Asus-H81M-C-Intel-LGA1150-DDR3-Desktop-Motherboard.jpg)
Asus H81M-C Intel LGA1150 DDR3 Desktop Motherboard MicroATX Socket H3
$23.99
![Asus Prime H310M-A R2.0 Intel LGA 1151 DDR4 Desktop Motherboard picture](/store/img/g/ld0AAOSw7q5mV2ql/s-l225/Asus-Prime-H310M-A-R2-0-Intel-LGA-1151-DDR4-Deskto.jpg)
Asus Prime H310M-A R2.0 Intel LGA 1151 DDR4 Desktop Motherboard
$54.99
![MSI B450M PRO-VDH MAX AM4 AMD B450 USB3.2 Micro-ATX Motherboard picture](/store/img/g/6G8AAOSwCwFf0Vli/s-l225/MSI-B450M-PRO-VDH-MAX-AM4-AMD-B450-USB3-2-Micro-AT.jpg)
MSI B450M PRO-VDH MAX AM4 AMD B450 USB3.2 Micro-ATX Motherboard
$67.99
![MSI H81I LGA1150 MINI-ITX DDR3 Desktop Motherboard With I/O Shield picture](/store/img/g/TGIAAOSwpzNiJ8-i/s-l225/MSI-H81I-LGA1150-MINI-ITX-DDR3-Desktop-Motherboard.jpg)
MSI H81I LGA1150 MINI-ITX DDR3 Desktop Motherboard With I/O Shield
$32.99
![Gigabyte M-ATX motherboard with Intel Core i3 8100 CPU and 8GB DDR4 RAM picture](/store/img/g/CCsAAOSw9mtkQuoe/s-l225/Gigabyte-M-ATX-motherboard-with-Intel-Core-i3-8100.jpg)
Gigabyte M-ATX motherboard with Intel Core i3 8100 CPU and 8GB DDR4 RAM
$84.00
![ASUS PRIME Z270-P Motherboard || Kit with/ Intel G3900 and 4 GB RAM picture](/store/img/g/D0AAAOSw5qVmcdTF/s-l225/ASUS-PRIME-Z270-P-Motherboard-Kit-with-Intel-G3900.jpg)
ASUS PRIME Z270-P Motherboard || Kit with/ Intel G3900 and 4 GB RAM
$36.59