-
System hangs when using a ralink based zaapa wireless card
Hi, I'm a complete profane to Linux, so please be patient
I am using Knoppix v4 with an AMD 900 Mhz 512Mb computer. I've got a Zaapa WiFi card installed with Ralink chipset. It seems to be recognized but the first time I try to scan for networks, it won't see anything. If I try for second time, it just gets frozen.
Questions: Is this card supported? Where can I see if Knoppix is recognizing it? (something like system properties in windows) I have found drivers for the card in Internet, but must be compiled and although I have tried to do it, have no clue why it won't work. I'm a bit lost, as you can see...
Thanks a lot for your time.
Dån
-
I have a similar problem when I boot with KNOPPIX_V4.0.2CD-200509-23-EN.
The boot process stops at:
Network device eth0 detected, DHCP broadcasting for IP. (Backgrounding)
Network device eth1 detected, DHCP broadcasting for IP.
I have a ethernet card and a Foxconn Foxconn WLL-3350 PCI Wireless Adapter which
uses a Ralink chipset. It works just fine with Ubuntu 5.10.
I found that KNOPPIX_V4.0.2CD-200509-23-EN does boot if I use the nodhcp cheat code:
boot: knoppix nodhcp
I can see the card in the Info Center.
KDE -> System -> KInfoCenter (Info Center)
then select PCI in the Index tab
reports the card as:
0000:00:0f.0 Network controller: RaLink Ralink RT2500 802.11 Cardbus Reference Card (rev 01)
Subsystem: RaLink: Unknown device 2450
Flags: bus master, show devsel, latency 32, IRQ 11
Memory at d9000000 (32-bin, non-prefetchable) [size=8k]
Capabilities: <available only to root>
I can get it up and runing with:
KDE -> KNOPPIX -> Network/Internet -> Network card configuration
In the Xdialog select "eth1 Netwerkkarte_1"
and Use DHCP broadcast? Yes
After that the nework is up and running as shown by ifconfig and a working Mozilla Firefox.
It looks like there is some silliness in the booting process that prevents the wireless card from working properly.
I also tried KNOPPIX 3.9 and 3.4 -- neither of them recognize the wireless card as a network interface.
George
-
Same problem here when I boot with the KNOPPIX_V4.0.2CD-200509-23-EN.
I have a Ralink wireless card as well, on an Avertec 6100 series laptop.
The boot process stops at:
Network device eth0 detected, DHCP broadcasting for IP. (Backgrounding)
Network device eth1 detected, DHCP broadcasting for IP. (Backgrounding)
I used the cheat-code as mentioned and it goes to the next line before hanging again (boot: knoppix nodhcp):
Skipping DHCP broadcast/network detection as requested . . .
Automounter started for: floppy cdrom.
_
Any other options? Nevermind.
Looked into the tips and triks under the cheat-codes page and entered the usefull option for Laptops with the previous cheat-code and it worked!
boot: knoppix acpi=off pnpbios=off noapic noapm nodhcp
New problem!
Tried to get my wireless going as mentioned in the previous post:
In the KNOPPIX Menu -> Network/Internet -> Network card configuration
In the Xdialog select "eth1 Netwerkkarte_1"
and Use DHCP broadcast? Yes
and after that it says DHCP broadcast fails
So, I tried "eth0 Netwerkkarte_0" and then it just froze up, I thought Linux didn't freeze up completely?
Any solution for me to get my wireless card working?
-
Yes solution is dont use linux at least knoppix or dont use rt2500 chip based card.
If you wanna use unix like system use PCBSD there my rt2500 (Asus wl-107g) card works.
And ubuntu or kubuntu (5.10) linux work well too with my card.
Similar Threads
-
By jbreazeale in forum Hdd Install / Debian / Apt
Replies: 9
Last Post: 08-12-2006, 03:32 PM
-
By DiabloGN in forum General Support
Replies: 3
Last Post: 04-19-2005, 06:22 AM
-
By techz_boy in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 09-02-2004, 06:21 PM
-
By joekrahn in forum Ideas
Replies: 1
Last Post: 02-24-2004, 05:20 PM
-
Replies: 3
Last Post: 11-13-2003, 05:52 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports picture](/store/img/g/fxsAAOSwZD5l6PSG/s-l225/1U-BareMetal-pfsense-opnsense-Router-Firewall-DNS-.jpg)
1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports
$149.00
![1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 240GB SSD 2x 10GBE picture](/store/img/g/7KoAAOSwephiKTf4/s-l225/1U-Supermicro-Server-10-Bay-2x-Intel-Xeon-3-3Ghz-8.jpg)
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 240GB SSD 2x 10GBE
$259.00
![Supermicro 1U Server X9SRI-F Xeon E5-2640 v2 2.5Ghz 16-Cores / 64GB / No HDD picture](/store/img/g/aYkAAOSwLGpmYf9P/s-l225/Supermicro-1U-Server-X9SRI-F-Xeon-E5-2640-v2-2-5Gh.jpg)
Supermicro 1U Server X9SRI-F Xeon E5-2640 v2 2.5Ghz 16-Cores / 64GB / No HDD
$149.99
![Super micro Server picture](/store/img/g/PNgAAOSweU1mSkvR/s-l225/Super-micro-Server.jpg)
Super micro Server
$168.00
![HPE ProLiant MicroServer Gen10 picture](/store/img/g/tb4AAOSwpRxmfLpK/s-l225/HPE-ProLiant-MicroServer-Gen10.jpg)
HPE ProLiant MicroServer Gen10
$420.00
![Supermicro Server 505-2 Intel 2.4GHz 16GB SYS-5018A-FTN4 - pfSense Compatible picture](/store/img/g/JDMAAOSwC91mR849/s-l225/Supermicro-Server-505-2-Intel-2-4GHz-16GB-SYS-5018.jpg)
Supermicro Server 505-2 Intel 2.4GHz 16GB SYS-5018A-FTN4 - pfSense Compatible
$220.48
![HP ProLiant MicroServer Generation 8 Xeon 4gb 4-BAY 2x500GB HDD (included) picture](/store/img/g/bzsAAOSwEYxmf3N2/s-l225/HP-ProLiant-MicroServer-Generation-8-Xeon-4gb-4-BA.jpg)
HP ProLiant MicroServer Generation 8 Xeon 4gb 4-BAY 2x500GB HDD (included)
$200.00
![HP HPE Microserver Gen 7 8 9 iLO 2/3/4/5Advanced License Lifetime Key| FAST SHIP picture](/store/img/g/jMgAAOSwlnhk2TU3/s-l225/HP-HPE-Microserver-Gen-7-8-9-iLO-2-3-4-5Advanced-L.jpg)
HP HPE Microserver Gen 7 8 9 iLO 2/3/4/5Advanced License Lifetime Key| FAST SHIP
$10.00
![2U 12 Bay SAS3 SuperMicro Server 6028U-TR4T+ W/ X10DRU-i+ Barebone 12 Caddy RAIL picture](/store/img/g/qa4AAOSwMxNk76rN/s-l225/2U-12-Bay-SAS3-SuperMicro-Server-6028U-TR4T-W-X10D.jpg)
2U 12 Bay SAS3 SuperMicro Server 6028U-TR4T+ W/ X10DRU-i+ Barebone 12 Caddy RAIL
$299.00
![Supermicro 2U Server 12 Caddy Bay 3.5 LFF E ATX Storage Chassis SAS2 6GBPS Rail picture](/store/img/g/1ksAAOSwuqhhuPcE/s-l225/Supermicro-2U-Server-12-Caddy-Bay-3-5-LFF-E-ATX-St.jpg)
Supermicro 2U Server 12 Caddy Bay 3.5 LFF E ATX Storage Chassis SAS2 6GBPS Rail
$199.00