on my machine it is just :
iwconfig eth0(eth1) essid "your essid" enc "sxxxx"
where xxxxx is the 5 character WEP, you can skip the enc part if you don't use WEP.
I just started using Knoppix, and I'm having a bit of a problem getting my wireless network connection up. I didn't have a problem with RedHat, so it's probably just a lack of knowledge on my part
Anyway, two connections are detected (lan and wlan card, presumably eth0 and eth1)... By default wlanconfig tries to configure eth0 and it fails. I went to console and ran it with eth1, following the prompts. But either way i get an error saying that it can't assign the ESSID when i choose the network SSID or leave it blank (with either eth0 or eth1). The network config doesn't work either... DHCP broadcast always fails. Any ideas how to set up my wlan card?
on my machine it is just :
iwconfig eth0(eth1) essid "your essid" enc "sxxxx"
where xxxxx is the 5 character WEP, you can skip the enc part if you don't use WEP.
SUN Blade X6250 Server 8GB RAM DUAL PROCESSORS 594-4531-01
$109.99
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Dell PowerEdge M640 Blade Server 2x Xeon Gold 5122 3.6GHz, No RAM, READ _
$401.04
Dell PowerEdge VRTX Rack Chassis 25-Bay 14.4TB HDD 2x M640 Blade 512GB RAM 2-Bay
$2335.00
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
HP ProLiant BL460c Server Blade (2 x CPU) 24GB RAM/No Drives
$45.60
Dell PowerEdge M1000E 16x Slots Blade Server W/ 8x Blade Server Blank Filler
$589.00
Dell PowerEdge M620 Blade Server
$39.99
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99