on my machine it is just :
iwconfig eth0(eth1) essid "your essid" enc "sxxxx"
where xxxxx is the 5 character WEP, you can skip the enc part if you don't use WEP.
I just started using Knoppix, and I'm having a bit of a problem getting my wireless network connection up. I didn't have a problem with RedHat, so it's probably just a lack of knowledge on my part![]()
Anyway, two connections are detected (lan and wlan card, presumably eth0 and eth1)... By default wlanconfig tries to configure eth0 and it fails. I went to console and ran it with eth1, following the prompts. But either way i get an error saying that it can't assign the ESSID when i choose the network SSID or leave it blank (with either eth0 or eth1). The network config doesn't work either... DHCP broadcast always fails. Any ideas how to set up my wlan card?![]()
on my machine it is just :
iwconfig eth0(eth1) essid "your essid" enc "sxxxx"
where xxxxx is the 5 character WEP, you can skip the enc part if you don't use WEP.
1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports
$149.00
1U Supermicro Firewall Router Jumpbox 6x 10GB Ethernet E3-1270 V3 32GB RAM 2x PS
$200.00
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 240GB SSD 2x 10GBE
$259.00
HP ProLiant MicroServer Gen8 Server Xeon E3-1220L 8GB RAM No HDD's
$229.99
HP HPE Microserver Gen 7 8 9 iLO 2/3/4/5Advanced License Lifetime Key| FAST SHIP
$10.00
HPE ProLiant MicroServer Gen10 16GB 4TB PID: 878488-S01
$425.00
HPE ProLiant MicroServer Gen10
$420.00
HP ProLiant MicroServer HSTNS-5151
$59.99
2U 12 Bay SAS3 SuperMicro Server 6028U-TR4T+ W/ X10DRU-i+ Barebone 12 Caddy RAIL
$299.00
Supermicro CSE-847 Server 2*INTEL XEON E5-2690 V2 96GB 36-Bay 3.5" 4U SEE NOTES
$200.99