on my machine it is just :
iwconfig eth0(eth1) essid "your essid" enc "sxxxx"
where xxxxx is the 5 character WEP, you can skip the enc part if you don't use WEP.
I just started using Knoppix, and I'm having a bit of a problem getting my wireless network connection up. I didn't have a problem with RedHat, so it's probably just a lack of knowledge on my part![]()
Anyway, two connections are detected (lan and wlan card, presumably eth0 and eth1)... By default wlanconfig tries to configure eth0 and it fails. I went to console and ran it with eth1, following the prompts. But either way i get an error saying that it can't assign the ESSID when i choose the network SSID or leave it blank (with either eth0 or eth1). The network config doesn't work either... DHCP broadcast always fails. Any ideas how to set up my wlan card?![]()
on my machine it is just :
iwconfig eth0(eth1) essid "your essid" enc "sxxxx"
where xxxxx is the 5 character WEP, you can skip the enc part if you don't use WEP.
LaCie 5BIG NETWORK 2 5-bay RAID HDD Bay [ SEE DESCRIPTION ]
$119.99
OWC MERCURY ELITE PRO DUAL THUNDERBOLT 2 USB 3 4TB RAID EXTERNAL HDD USE 6 DAYS
$123.49
ORICO 5 Bay Raid Enclosure USB3.0 SATA External Hard Drive Enclosure Up to 80TB
$115.59
ORICO 5 Bay Raid USB3.0 to SATA External Hard Drive Enclosure for 3.5'' HDD LOT
$134.39
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile
$15.98
Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 4Y5H1 High Profile
$14.99
Intel RAID Storage Controller RS3WC080
$180.00
Yottamaster 2 Bay RAID Hard Drive Enclosure USB 3.1 For 2.5" SATA HDD SSD UASP
$56.25
OWC Guardian Maximus Raid Enclosure SATA Hard Drive FireWire
$36.99
UGREEN 2 Bay USB-C to SATA HDD SSD RAID Enclosure
$55.00