I have been moaning about a bad superblock problem and looking at the number of people that have looked at my posts I am not alone. anyway I think the problem has something to do with reiserfs. Choosing the knoppix type install leads to knoppix formatting the partition reiserfs by deafult even if the user has formatted the partition ext2/3 whatever. when the remastered disk starts it does fsck which looks for an ext2 partition. However it comes across a reiserfs [partition doesn't recognize doesn't recognise it so gives a bad superblock /bad magic number error message. To make sure the drive is formatted ext2/3 install use the Debian style install, select ext 3 and then double back before the actual install begins.The partition is then ext3. My fstab then looks like /mnt/hda5 ext3 default error=remount,ro 0 1. I edited out the error=remount, ro and things seem to be going alot better. I do have a problem at the moment in that the installation hangs before it boots apache2, but I am not sure if this is connected.
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive
$109.99
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99
Western Digital 4TB Internal 7.2KRPM 3.5" (WD4000FYYZ) SATA Hard Drive ZERO HOUR
$69.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$74.99
CISCO A03-D1TBSATA 1TB 7.2K 6G 2.5INCH SATA HDD
$9.00
Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$93.99
WD Ultrastar DC HC530 14TB SATA 6G 3.5" 7200RPM Enterprise HDD - WUH721414ALE604
$110.00
Western Digital WD4000FYYZ RE 4TB 7200 RPM 64MB Cache SATA 6Gb/s 3.5" Hard Drive
$24.11
1TB HDD/SSD 2.5" SATA Hard Drive for Laptop with Win 10/Win 11 Pro Pre-installed
$44.55