All I had to do was run the previous procedure and the plug the card in.....
I had a problem with every driver except this one so here you guys go.... hope it helps...
First you need the HP driver SP23107A, Extract the files, I used my handy USB Memory Card...
Boot Knoppix
Go to the Konsole
type:
su
Install the driver:
ndiswrapper -i bcmw15.inf
check by running:
ndiswrapper -l
It should say driver and hardware present
then type:
ndiswrapper -m
Now type:
modprobe ndiswrapper
Now check with:
dmesg
If both ndiswrapper and the driver loaded your good to go, now hit the wireless activation button and the light should come on. You can now use the config scripts in the KNOPPIX menu the do the rest.
I haven't tested this with other 4306 chips, I've got a Linksys WPC54G ver. 1.2 and it also is a 4306 Chip... Stay Tuned...
All I had to do was run the previous procedure and the plug the card in.....
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
Samsung 16GB 2Rx4 PC4-2133P DDR4-17000 1.2V RDIMM ECC Registered Server Memory
$16.29
HyperX FURY DDR3 8GB 16GB 32GB 1600 MHz PC3-12800 Desktop RAM Memory DIMM 240pin
$12.90
Samsung 8 GB PC4-17000 DDR4-2133 1Rx8 DDR4 Desktop Memory HP P/N 798034-001
$10.00
A-Tech 8GB PC3-12800 Desktop DDR3 1600 MHz Non ECC 240-Pin DIMM Memory RAM 1x 8G
$13.99
A-Tech 16GB 2 x 8GB PC3-12800 Laptop SODIMM DDR3 1600 Memory RAM PC3L 16G DDR3L
$27.98
Kingston HyperX FURY DDR3 8GB 16GB 32G 1600 1866 1333 Desktop Memory RAM DIMM
$13.25
32GB (4X8GB) DDR3 PC3-12800 1600 NON ECC LOW DENSITY MEMORY F3-12800CL10Q-32GBXL
$32.00
A-Tech 256GB 4x 64GB 4Rx4 PC4-19200 ECC Load Reduced LRDIMM Server Memory RAM
$287.96
A-Tech 64GB 4x 16GB 2Rx4 PC4-17000R DDR4 2133MHz ECC REG RDIMM Server Memory RAM
$87.96