-
Knoppix live CD and data recovery help needed!
My system (XP SP2 home) locked up right in the middle of a system restore. Now I can't boot to windows or safe mode. I downloaded and ran the Knoppix live CD to try and access some really important files and burn them to a CD before reinstalling Windows. The problem is my system has two SATA drives set up in a RAID0 array. Will that effect data recovery as far as them being recognized because they are SATA drives, their in a RAID array, or both? They show up on the desktop as two separate drives, and I get an error something to the effect of "unreadable file system" if I click on the icon.
I searched the board and FAQ'S and got some help, but nothing specific to my situation. I'm new to Knoppix and Linux in general, so I'm not sure how to handle this. I was told this was the place to look
Any help or suggestions would be greatly appreciated!
TIA
Billy
-
Administrator
Site Admin-
Re: Knoppix live CD and data recovery help needed!
Originally Posted by
comfortably numb
The problem is my system has two SATA drives set up in a RAID0 array.
Most raid arrays do not look as a true hardware disk to the system; rather the system sees the individual dirves and has to run a special software driver to give you the RAID functions. Unless there is a driver for your hardware for Linux that prefectly matches the layout of the RAID system under the Windows driver, then I know of no way that you could recover the data with Knoppix or any Linux system.
-
Re: Knoppix live CD and data recovery help needed!
Originally Posted by
Harry Kuhman
Unless there is a driver for your hardware for Linux that perfectly matches the layout of the RAID system under the Windows driver, then I know of no way that you could recover the data with Knoppix or any Linux system.
I don't know if it makes a difference, but there is no dedicated controller card for the RAID array, its handled by the motherboard (ABIT AV. Is there still a driver needed? There is a VIA SATA Driver on the Abit site, I would assume they are necessary? If so, how would I install them?
Similar Threads
-
By JStevenson in forum MS Windows & New to Linux
Replies: 12
Last Post: 07-19-2009, 03:39 PM
-
By Packrat1947 in forum General Support
Replies: 2
Last Post: 01-18-2009, 12:21 AM
-
By jf1976 in forum Customising & Remastering
Replies: 0
Last Post: 02-16-2006, 06:10 PM
-
By OpenIntro in forum Hardware & Booting
Replies: 27
Last Post: 04-05-2005, 10:59 PM
-
By cohyster in forum General Support
Replies: 0
Last Post: 01-03-2005, 06:01 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell Poweredge R640 Server | 2x Silver 4114 20 Cores | 96GB | 8x 1.8TB Dell SAS
$2749.99
Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB
$510.00
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 1x 300GB HDD
$89.99
Dell PowerEdge R730, 2 sinks, SystemBoard, 8 trays,H330,Idrac 8 exp, 2x750w Psu
$135.00
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell Poweredge R730xd 2.5in 2x E5-2690 v3 2.6ghz 24-Cores 64gb H730 2x 750w
$189.99
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x600Gb SAS, Proxmox
$360.00
DELL POWEREDGE T430 SERVER W/ DUAL XEON E5-2609 CPU & 16GB MEMORY
$329.00
DELL PowerEdge R630 8SFF Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45
$254.00
DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45
$274.00