I had this problem - set the timezone to 'local' and see what happens.
I'm running the HD-install "boot like the CDROM" version of Knoppix 4.0.2 to provide a fileserver for the other machines on the network. Almost everything works as it should (just a few challenges left to sort.)
However, I have a timezone glitch. The machine knows that I'm in England (calls it London, but hey), and that I use GMT. Stuff it pulls off the other machines or off the Internet that's time-based displays right. BUT the clock on the PC is 5 hours ahead. If I reset it, it's fine but it will be 5 hours ahead again when I restart the machine. It seems convinced that it's somewhere 5 hours behind GMT. If I forget, I get some wacky timestamps on files.
Anyone have any ideas how to get to work in real GMT and not add 5 hours at boot?
I had this problem - set the timezone to 'local' and see what happens.
Yes - it's on "Local", but screws up the clock on every reboot.
I have a suspicion the "system" stores something in a read-only file somewhere, which forces it to treat the systemn clock as being in EST on bootup, regardless of other settings.
it likes to live on New York time
mine too
make sure I know when we find the prob
godammit !!! SUCCESS !!!!!!
only taken me all day, and i don't usually last that long with the looking and researching and constant rebooting
to check things
while you forget what you were checking
and go and do something else
etc
etc
etc
http://www.infodrom.org/Debian/doc/m...-sysadmin.html
right, we need the timezone set AND the clock
doing the
tzselect
will show you what you need to put somewhere, namely
/home/username/.profile
thats a file in the home directory, not a directory
and it needs to be setup from the user dosshell too
i did one from the root dos shell, and the permissions on the file weren't right for the user to read it
but if you then set the clock and reboot it puts that danged New York time where you just were and then sets the TZ set zone relative to New York
again
well, looking at the link further up....
/etc/default/rcS
change the
UTC=no to yes
and reboot
and set the time
and reboot
and check it
and reboot
and feel very satisfied
and smug
and i'm currently doing my 6 other systems to check
but so far
SINGS
I feel good, nananananana
I knew that I would now
/SINGS
I found a workaround... see
http://www.knoppix.net/forum/viewtopic.php?t=27627
and
http://www.ramin.com.au/linux/slug-b...-knoppix.shtml
Marghanita
Dell EMC 092GD6 Broadcom 9305-16i LSI Quad Port 4 Port SAS RAID Controller
$84.99
ORICO 5 Bay Raid USB3.0 to SATA External Hard Drive Enclosure for 3.5'' HDD LOT
$134.39
OWC Guardian Maximus Raid Enclosure SATA Hard Drive FireWire
$36.99
ASUS Hyper M.2 x16 Gen 4 RAID Card- Used Working
$32.95
Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 4Y5H1 High Profile
$17.99
Adaptec AIC-9405W SAS/SATA ICP5045B/256MB ID15915 sata sas raid controller
$100.00
Dell PERC RAID Controller Card
$15.00
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
OWC MERCURY ELITE PRO DUAL 2TB 2-Bay e-SATA USB 3.2 GEN 1 RAID ARRAY USE 27 DAYS
$99.99
Yottamaster 5 Bay RAID Hard Drive Enclosure Type-C B For 2.5" 3.5" SATA HDD SSDs
$139.99