The one you need is nodhcp, and you will boot the PC with:
knoppix nodhcp
I've got a laptop here at the shop that is freezing on bootup when it gets to "Network Device eth1 detected, DHCP broadcasting for IP'. I figured that since the job is 'recovery of data', 'not fix it for the network' that I would boot Knoppix (4.0) up with a 'no network' cheatcode. But alas, as I search the cheatcodes I can see nothing that disables network autodetect. Please can somebody tell me how to boot knoppix from the cd without it doing a network check? (Incidentally, cheatcode failsafe will allow me to boot, but I still need usb to back the data up). Thanks in advance. Sorry for being such a noobtool.
The one you need is nodhcp, and you will boot the PC with:
knoppix nodhcp
HGST Ultrastar HE10 HUH721010ALE600 10TB SATA 6Gb/s 7200RPM 3.5" Enterprise HDD
$74.99
WD4000FYYZ Western Digital 4TB SATA 3.5 Hard Drive
$149.99
Western Digital WD60PURZ 6TB Hard Drive SATA6 Gb/s 64MB Cache 3.5 Inch
$109.99
WF12F DELL 1TB 7.2K 6GBPS SATA 2.5'' HDD HARD DRIVE ST91000640NS 0WF12F
$25.00
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$82.99
Seagate Exos 7E10 ST2000NM000B 2TB 7200RPM SATA 6.0Gb/s 3.5" Internal Hard Drive
$29.99
2 PACK Seagate ST1000LM035 Mobile HDD 1TB 2.5" SATA III Laptop Hard Drive
$27.25
Western Digital WD5000LPLX 500GB 2.5" SATA 32MB 6Gb/s 7200RPM Laptop Hard Drive
$7.99
Western Digital WD4000FYYZ RE 4TB 7200 RPM 64MB Cache SATA 6Gb/s 3.5" Hard Drive
$28.45
HDD 3.5" SATA Hard Drive with Windows 7/Win 10 Installed Legacy
$35.99