-
booting problem: apic error on cpu0: 02(02)
Hello!
I'm writing you because I can't get booting knoppix 4.0 on an AMD athlon xp 2600+.
I've tried several cheat codes but it doesn't work.
With failsafe debug -b 3 I'm getting the following error:
apic error on cpu0: 02(02)
Could you help me, please?
Regards,
Antonio.
-
noapic?
Sorry to ask the obvious question. It seems you must have tried
noapic
but since you did not specifically say so, I gotta' ask.
Do try to give detailed information as best you can. Even using a forum involves some learning.
Otherwise, google for something like your question.
e.g.-- apic error Knoppix
and if that doesn't work, try other related words. I usually have a terrrible time hitting the right words to get the results I want.
-
Re: noapic?
Originally Posted by
irlandes
Sorry to ask the obvious question. It seems you must have tried
noapic
but since you did not specifically say so, I gotta' ask.
Do try to give detailed information as best you can. Even using a forum involves some learning.
Otherwise, google for something like your question.
e.g.-- apic error Knoppix
and if that doesn't work, try other related words. I usually have a terrrible time hitting the right words to get the results I want.
Off course I tried noapic. Off course I was searching info about the error in google.
Why do you thing that I'm a beginner user?
If I could try failsafe debug option, do not you think that if I was able to see the cheatcodes and to try them, I'm not a beginner user.
If I'm asking in the forum is because I can not find the solution either with the cheat codes or google.
I think before answer a question you should think about your response, and what it was the question.
Many times if a person asks in a specific forum is because he/she can not find a solution in the google.
-
Senior Member
registered user
Try This
Sounds like BIOS config problems.
First try to avoid using the APIC bus:
disable SMP and UP_IOAPIC.
If your BIOS allows it, set interrupt mode to PIC not APIC.
If you still get these errors also disable UP_APIC.
sakiZ
Similar Threads
-
By delfin13 in forum MS Windows & New to Linux
Replies: 2
Last Post: 01-08-2010, 07:09 PM
-
By poirot in forum Hardware & Booting
Replies: 3
Last Post: 02-06-2007, 03:40 PM
-
By Demus in forum General Support
Replies: 0
Last Post: 07-08-2004, 06:29 AM
-
By DJTOMCAT in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 06-09-2004, 01:18 PM
-
By alexander in forum General Support
Replies: 2
Last Post: 01-25-2004, 04:34 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Cisco GLC-GE-100FX 100BASE-FX SGMII SFP, 1310nm, 2km, LC, MMF
$83.99
Cisco Systems NCS2K-20-SMRFS-L optical multiplexor CISCO EXCESS
$3599.00
Cisco w/ Green Hologram DS-SFP-FC32G-SW FC 32G FC SFP+ Transceiver Module
$85.00
Cisco Systems Nexus 7700 10 Slot Chassis Fab 3 Mod | N77-C7710-FAB-3
$4999.99
Cisco WS-C3850-48P-L 48-Port Gigabit 3850 PoE Switch w/ 715W+ C3850-NM-4-1G Mod
$83.00
Cisco Nexus N9K-C93180YC-EX 48-Port 1/10/25G SFP + 6 40G/100G QSFP28 Switch
$789.00
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850
$38.99
Cisco Catalyst 3850 WS-C3850-48U-S 48-Port UPOE Gb Switch w/ NM-2-10G (BH)
$134.96
Cisco N5K-C5010P-BF 20-Port Nexus 5010 Series 10GbE Gigabit Ethernet Switch
$119.99