I'm pretty new at this, so hopefully this will have an easy fix
I'm running Knoppix from the CD which is /dev/hda
My main HDD has 2 partitions, which are /dev/hdc1 and /dev/hdc5
I have an IDE card with a secondary HDD connected to it. The jumper is set to slave, but it is not being loaded at all by Knoppix. I'm guessing it's b/c the IDE card isn't loading. I've checked in qtparted to make sure I'm not missing it, and the only things listed are my CDR and my main HDD.
How do I get this to load so that I can access this HDD? I don't want to mount the drive, just access it so that I can dd the 4 partitions that are on it, in can that makes any difference.
Thanks for any help you can give. If you need more info, please let me know.
-Tara
HGST Ultrastar HE10 HUH721010ALE600 10TB SATA 6Gb/s 7200RPM 3.5" Enterprise HDD
$74.99
Western Digital WD60PURZ 6TB Hard Drive SATA6 Gb/s 64MB Cache 3.5 Inch
$109.99
WD4000FYYZ Western Digital 4TB SATA 3.5 Hard Drive
$149.99
WF12F DELL 1TB 7.2K 6GBPS SATA 2.5'' HDD HARD DRIVE ST91000640NS 0WF12F
$25.00
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$82.99
Seagate Exos 7E10 ST2000NM000B 2TB 7200RPM SATA 6.0Gb/s 3.5" Internal Hard Drive
$29.99
2 PACK Seagate ST1000LM035 Mobile HDD 1TB 2.5" SATA III Laptop Hard Drive
$27.25
Western Digital WD5000LPLX 500GB 2.5" SATA 32MB 6Gb/s 7200RPM Laptop Hard Drive
$7.99
WD 16TB Elements Desktop, Certified Refurbished Hard Drive - RWDBWLG0160HBK-NESN
$174.99
Western Digital WD4000FYYZ RE 4TB 7200 RPM 64MB Cache SATA 6Gb/s 3.5" Hard Drive
$28.45