Results 1 to 7 of 7

Thread: windows wont boot, trying to fix registry from knoppix

  1. #1
    Junior Member
    Join Date
    Dec 2005
    Posts
    1

    windows wont boot, trying to fix registry from knoppix

    windows will freeze and reboot, and will not boot into safe mode even.
    im using a knoppix cd and accessing the windows partition (ntfs)

    how can i look at/modify the registry files and other system files in windows from
    knoppix?

  2. #2
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441
    Knoppix can not safely write to or even delete files on a NTFS partition.
    ---
    Verifying of md5 checksum and burning a CD at slow speed are important.

  3. #3
    Senior Member registered user
    Join Date
    Jan 2005
    Posts
    200
    OTOH, what have you got to lose? It already won't boot. As long as all the critical data that you need is backed up, why not give it a shot? The captiventfs driver is not completely stable, but I've heard plenty of success stories.

  4. #4
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441
    Quote Originally Posted by foamrotreturns
    OTOH, what have you got to lose? It already won't boot
    Complete loss of data, or even worse thinking that you have things fixed and doing even more work, only to have everything lost as the corrupted disk system crashes again. We can assume that jt thinks there is something out there worth saving (although apparently not worth having made regular backups even though using a windows system well known to do this). If there is nothing worth saving then I would suggest just reinstalling fresh and not risking a corrupt partition even more likely to fail again; if something is worth saving then it would be wise to do the normal recovery steps (since Knoppix can read from the NTFS partition just fine) such as writing to a disc, transfering the files across a network, saving to an external USB device, or even adding drive with a FAT partition and moving important files there. After recovering any desired files then a complete reformat and reinstall is the safest bet.

  5. #5
    Senior Member registered user
    Join Date
    Jan 2005
    Posts
    200
    Precisely why I said "As long as all the critical data that you need is backed up, why not give it a shot?"
    I would always recommend a complete reformat, but there is always a chance that jl is looking for a bootable solution, even if it's only for a short time. For instance, Outlook needs to be running in order to export its settings & data into a .pst file.

    Telling a person that they should have backed up in case something like this happened is like a cop telling the driver of a wrecked car that she should have braked to avoid rear-ending the car in front of her. It's completely pointless, as the person a) already knows what they should have done, and probably feel pretty sheepish that they didn't, and b) could have deduced that solution without assistance.
    It's easy to be the answer man, but when you're on the asking end, nothing hurts more than someone talking down to you.

  6. #6
    Member registered user
    Join Date
    Jun 2005
    Location
    etherworld
    Posts
    92
    gosh.....i HATE giving Ms advice in a KNOPPIX/Linux forum..

    Boot to XPoop CD (set BIOS to boot from CDROM as 1st in boot order) and choose "R" for repair and load recovery console....then try these one at a time;
    (ONLY if you did NOT use HDD manu utilities to partition and format)

    FIXMBR
    FIXBOOT
    BOOTCFG /rebuild

    if you DID use HDD DDO software - load the backup floppy, otherwise you're SOL

  7. #7
    Senior Member registered user
    Join Date
    Jan 2003
    Location
    Southern Indiana
    Posts
    110

    Use NT password/registry editor by Peter Hordahl.

    This is a boot disk - linux based:
    http://home.eunet.no/~pnordahl/ntpasswd/

    It will edit the registry. It is primarily used to reset administrative password. It also accesses the registry. Registry writes to NT form linux are hazardous if you are creating or expanding the file. If you tinker a file and write it back, it apparently does not cause difficulties. This utility has been around for 4-5 years that I am aware of and doesn't cause problems.

    Read the website for conditions and uses. The editor is a little clunky as a registry editor, but it works. You can also copy the registry hives off to the floppy to better peruse or analyze them.

    Dick

Similar Threads

  1. Windows 2000 Registry & Restoring it with Knoppix
    By skronrod in forum MS Windows & New to Linux
    Replies: 5
    Last Post: 04-03-2006, 05:14 AM
  2. Accessing Windows Registry Through Knoppix
    By kaplan71 in forum MS Windows & New to Linux
    Replies: 5
    Last Post: 02-24-2005, 10:09 AM
  3. Possible to remove spyware Windows registry files w/Knoppix?
    By adkmom in forum MS Windows & New to Linux
    Replies: 11
    Last Post: 01-30-2005, 04:34 PM
  4. Windows registry lost after running Knoppix
    By viggooo in forum General Support
    Replies: 10
    Last Post: 01-15-2004, 03:51 PM
  5. windows registry
    By punk000 in forum General Support
    Replies: 6
    Last Post: 08-26-2003, 02:55 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x600Gb SAS, Proxmox picture

Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x600Gb SAS, Proxmox

$340.00



Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS picture

Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS

$721.06



HP ProLiant DL360 G9 Server | 2 x E5-2660V3 2.6Ghz | 64GB | 2 x 900GB SAS HDD picture

HP ProLiant DL360 G9 Server | 2 x E5-2660V3 2.6Ghz | 64GB | 2 x 900GB SAS HDD

$339.00



H261-Z61 2U 24SFF AMD Server 8x EPYC 7551 256-Cores 256GB RAM 8x25G NIC 2x2200W picture

H261-Z61 2U 24SFF AMD Server 8x EPYC 7551 256-Cores 256GB RAM 8x25G NIC 2x2200W

$2612.18



DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45 picture

DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45

$274.00



Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD picture

Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD

$389.99



HP Proliant DL360 Gen9 28 Core SFF Server 2X E5-2680 V4 16GB RAM P440ar No HDD picture

HP Proliant DL360 Gen9 28 Core SFF Server 2X E5-2680 V4 16GB RAM P440ar No HDD

$196.95



Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB picture

Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB

$510.00



HP ProLiant DL360 Gen9 Server 2x E5-2699v3 2.3GHz =36 Cores 32GB P440AR 4xRJ45 picture

HP ProLiant DL360 Gen9 Server 2x E5-2699v3 2.3GHz =36 Cores 32GB P440AR 4xRJ45

$309.00



1U Server (6-8 VM's) Vsphere VPS Short Depth 20

1U Server (6-8 VM's) Vsphere VPS Short Depth 20" XEON 3.5Ghz 32GB RAM X10SLM-F

$199.00