Try appending vga=ask to the boot prompt. Once you can boot in vga mode its just a matter of setting up the correct mode lines for X.
Hello,
I have troubles with knoppix live CD boot.
I have intel 915GV chipset with video integrated, monitor is AOC 7GLRA+
Both support 1152x864 at v100.3Hz, h91,6kHz ( currently under winXP)
After I reboot to knoppix, either with no options( just run 'knoppix'), or with any of thinkable resolutions( tested with screen=1152x864, 1024x768; vsync=91, 72; hsync=100, nothing) nothing worked.
Knoppix starts finding hardware, but just when it should initialize video&monitor, my screen goes crazy( just vertical lines with no sense...) I run in expert mode with same result.
I also tried SuSE & Mandriva live CDs with same error.
Any help is appreciated.
Miro
PS: I also tried with xmodule=vesa, no help...
Try appending vga=ask to the boot prompt. Once you can boot in vga mode its just a matter of setting up the correct mode lines for X.
I tried vga=ask, it just asked me for size of text console.
But X had same problems as before.
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
Seagate ST24000NM002H 24TB HDD Exos X24 HD 3.5 SATA 7200 Seagate Warranty
$399.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$79.99
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99
WD Ultrastar DC HC530 14TB SATA 6G 3.5" 7200RPM Enterprise HDD - WUH721414ALE604
$110.00
Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$93.99
CISCO A03-D1TBSATA 1TB 7.2K 6G 2.5INCH SATA HDD
$9.00
HGST Ultrastar HE10 10TB SATA 6.0Gb/s 7200 3.5" Datacenter HDD - HUH721010ALE601
$79.99
Western Digital WD4000FYYZ RE 4TB 7200 RPM 64MB Cache SATA 6Gb/s 3.5" Hard Drive
$24.11
Western Digital DC HC320 Ultrastar 8TB 7200RPM SATA HD, HUS728T8TALE6L4, 0B36404
$99.00