Results 1 to 5 of 5

Thread: Trying to get a pre-built Knoppix environment to boot...

  1. #1
    Junior Member
    Join Date
    Mar 2016
    Posts
    1

    Trying to get a pre-built Knoppix environment to boot...

    Hi everyone,

    An academic has given me a copy of a KNOPPIX with a program built into it. See the imgur link below for the file structure I have been given.
    The files were given to me in a zipped folder, with the only instruction being to 'burn the files within this zip folder to a CD'.

    Is there a specific process I have to follow to get the files I've been given into a bootable state? Everything I have tried has not worked: simply burning the files using any CD burning software does not result in a bootable CD. The guides I have found for burning a bootable KNOPPIX CD also don't appear to be applicable to my situation since I'm not creating a brand new KNOPPIX environment - I'm trying to get a pre-existing and modified environment to boot.

    I've been assured that these files have resulted in a bootable and functional KNOPPIX system in the past.




    isolinux.cfg:

    Code:
    DEFAULT linux26
    APPEND ramdisk_size=100000 init=/etc/init lang=us vga=791 initrd=miniroot.gz nomce quiet alsa noscsi BOOT_IMAGE=knoppix
    TIMEOUT 300
    
    PROMPT 1
    DISPLAY boot.msg
    F1 boot.msg
    F2 f2
    LABEL lamppix
    KERNEL linux26
    APPEND ramdisk_size=100000 init=/etc/init lang=us vga=791 initrd=miniroot.gz nomce quiet alsa noscsi BOOT_IMAGE=knoppix
    LABEL lamppix-scsi
    KERNEL linux26
    APPEND ramdisk_size=100000 init=/etc/init lang=us vga=791 initrd=miniroot.gz nomce quiet alsa BOOT_IMAGE=knoppix
    LABEL knoppix-txt
    KERNEL linux26
    APPEND ramdisk_size=100000 init=/etc/init lang=us vga=normal initrd=miniroot.gz nomce quiet alsa BOOT_IMAGE=knoppix
    LABEL expert
    KERNEL linux26
    APPEND ramdisk_size=100000 init=/etc/init lang=us vga=791 initrd=miniroot.gz nomce alsa BOOT_IMAGE=knoppix
    LABEL fb1280x1024
    KERNEL linux26
    APPEND ramdisk_size=100000 init=/etc/init lang=us vga=794 xmodule=fbdev initrd=miniroot.gz alsa nomce quiet noscsi BOOT_IMAGE=knoppix
    LABEL fb1024x768
    KERNEL linux26
    APPEND ramdisk_size=100000 init=/etc/init lang=us vga=791 xmodule=fbdev initrd=miniroot.gz alsa nomce quiet noscsi BOOT_IMAGE=knoppix
    LABEL fb800x600
    KERNEL linux26
    APPEND ramdisk_size=100000 init=/etc/init lang=us vga=788 xmodule=fbdev initrd=miniroot.gz alsa nomce quiet noscsi BOOT_IMAGE=knoppix
    LABEL failsafe
    KERNEL linux26
    APPEND ramdisk_size=100000 init=/etc/init lang=us vga=normal nosound noapic noscsi nodma noapm nousb nopcmcia nofirewire noagp nomce nodhcp xmodule=vesa initrd=miniroot.gz BOOT_IMAGE=knoppix
    LABEL userdef
    KERNEL linux26
    APPEND ###############################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################

    Thank you so much for reading! I really need all the help I can get

  2. #2
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441
    Knoppix is normally released as a ISO file that MUST be burnt "AS AN IMAGE" to a CD to make it bootable. Simply copying any set of files (or even a bootable ISO) to a disc (DVD rather than CD most recently) will not allow you to boot the resulting disk, you just end up with a disc with files on it but no boot structure. If a disc could be created that way, then I expect Klaus and others would do it, as convincing newcomers to burn the ISO file "AS AN IMAGE" is one of the more challenging things for a novice to overcome. If you want to be able to boot a disc you simply can't just copy files to it. So whoever gave you that information was wrong. Beyond that I don't know what he was trying to do or what he gave you, I suggest that you get back in touch with him.

    However, you say that you got a zipped folder, but I have to question if you are sure that you were given a zipped folder of are you letting Windows hide file extensions from you and have you by chance really been given an ISO file? Many people have come here thinking they have a zip file but really have an ISO file and Windows is hiding the extension from them (and they foolishly don't turn that "feature" off). If you have an ISO file then follow the instructions for burning it "AS AN IMAGE" and you'll likely produce a bootable image.

    I recommend Nero for this purpose, even the brief trial version. Windows 7 (and I suspect later versions) can burn an ISO into a bootable image but Windows doesn't let you do a low speed burn, and high speed burns have their own set of booting problems.
    Last edited by Harry Kuhman; 03-11-2016 at 06:12 AM.
    ---
    Verifying of md5 checksum and burning a CD at slow speed are important.

  3. #3
    Senior Member
    Join Date
    Jan 2012
    Posts
    110

    NOT "BURNING". Why not and How eventually

    [QUOTE=Harry Kuhman;133498]Knoppix is normally released as a ISO file that MUST be burnt "AS AN IMAGE"

    Mr Kuhman

    Now that "usb devices" are very common, do you know why

    it is not possible

    to get from official sites a single file especially dedicated for direct

    INSTAALATION on them and so avoiding "BURNING" matters.

    My question is probably too naïve...but it may be a suggestion.

    Thanks you eventually for your response.

    knp

  4. #4
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441
    I have no knowledge of why Klaus chooses to do what he does or does not do.

    My use of Knoppix has always been limited to the Live CD or DVDs that it was designed for. I have tried to get flash drives working in the past, but never with any luck. Others have gotten this to work so I will accept that the fault is with me but I do not believe it is obviously simple. Nor have I had much luck with installed Knoppix and "persistence". For normal Linux installs I suggest distros that are intended to be installed to disc, with my personal choice being Debian.

    There are tools that have been developed that will install an ISO to a flash drive and make it bootable. But they are not really want you want either. That would only give you a "Live DVD" read only version of Knoppix stored on a flash drive, and you seem to want a fully functional and flexible read/write system on your flash drive. All that I have to offer here is that isn't Knoppix. Can it be make to work? I believe the answer is yea, kinda, sorta, with more effort than it is worth and with more issues cropping up in the future. Again, I suggest installing a distro like Debian to your flash drive.
    ---
    Verifying of md5 checksum and burning a CD at slow speed are important.

  5. #5
    Senior Member
    Join Date
    Jan 2012
    Posts
    110
    Thanks you Mr H. Kuhman.

    knp

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G picture

A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G

$13.99



HyperX FURY RAM DDR4 16GB 8GB 32GB 4GB 3200 2666 2400 2133 Desktop Memory DIMM picture

HyperX FURY RAM DDR4 16GB 8GB 32GB 4GB 3200 2666 2400 2133 Desktop Memory DIMM

$9.64



A-Tech 16GB 2 x 8GB PC3-12800 Laptop SODIMM DDR3 1600 Memory RAM PC3L 16G DDR3L picture

A-Tech 16GB 2 x 8GB PC3-12800 Laptop SODIMM DDR3 1600 Memory RAM PC3L 16G DDR3L

$27.98



A-Tech 8GB PC3-12800 Desktop DDR3 1600 MHz Non ECC 240-Pin DIMM Memory RAM 1x 8G picture

A-Tech 8GB PC3-12800 Desktop DDR3 1600 MHz Non ECC 240-Pin DIMM Memory RAM 1x 8G

$13.99



CRUCIAL DDR3L 8GB 16GB 32GB 1600 MHz PC3-12800 Laptop Memory RAM SODIMM 204-Pin picture

CRUCIAL DDR3L 8GB 16GB 32GB 1600 MHz PC3-12800 Laptop Memory RAM SODIMM 204-Pin

$14.35



A-Tech 16GB 2x 8GB PC3-12800 Desktop DDR3 1600 MHz 240pin DIMM Memory RAM 16G 8G picture

A-Tech 16GB 2x 8GB PC3-12800 Desktop DDR3 1600 MHz 240pin DIMM Memory RAM 16G 8G

$27.98



Crucial  DDR3 16GB 1600 2x 8GB PC3-12800 Laptop SODIMM Memory RAM PC3L 16G DDR3L picture

Crucial DDR3 16GB 1600 2x 8GB PC3-12800 Laptop SODIMM Memory RAM PC3L 16G DDR3L

$21.95



HMT84GL7AMR4C-RD 32GB DDR3 Server Memory RAM 14900L ECC REG 4Rx4 SK Hynix Cisco picture

HMT84GL7AMR4C-RD 32GB DDR3 Server Memory RAM 14900L ECC REG 4Rx4 SK Hynix Cisco

$13.99



Hynix 64GB 4Rx4 PC4-2133P-L LRDIMM DDR4-17000 ECC Load Reduced Server Memory RAM picture

Hynix 64GB 4Rx4 PC4-2133P-L LRDIMM DDR4-17000 ECC Load Reduced Server Memory RAM

$64.99



A-Tech 64GB 4x 16GB 2Rx4 PC4-19200R DDR4 2400MHz ECC REG RDIMM Server Memory RAM picture

A-Tech 64GB 4x 16GB 2Rx4 PC4-19200R DDR4 2400MHz ECC REG RDIMM Server Memory RAM

$87.96