wow! i have used knoppix on PII@233Mhz and 128M ram just fine. so your should work great
I read the minimum system requirements for Knoppix on the site, but was wondering, with these specs, will I have good quality?
AMD 3500+ (Roughly 2.2 GHz)
192 RAM (512 total 256 taken up by video, dont know about the other part...its a compaq =(
200 GB HDD
Thanks
wow! i have used knoppix on PII@233Mhz and 128M ram just fine. so your should work great
Thanks for the quick response.
How about a laptop with a dead (primary)cd drive
Da Cider:
I am studying the possibility of copyng the entire CD on a flash card and use it in the PCMCIA port of my old laptop(using a CF to PCMCIA adapter), and telling the BIOS to boot first from there. It is easier said than done, but worth a try as son as I get a CF card big enough. If your laptop has a USB port, and the BIOS allows to boot from there, use a jump drive to try it out! It could work, it could not, but it is worth a try!
Gabriel
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2620V3 | NO RAM | P244BR | 2xHDD Tray
$179.00
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2630V3 | 32GB | P244BR | 2x300GB 15K
$299.00
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell M630 PowerEdge Blade Server
$700.00
HP ProLiant BL460c Server Blade (2 x CPU) 24GB RAM/No Drives
$45.60
Dell PowerEdge M620 Blade Server
$39.99
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99