could some one give me some kind of idea of how much net time and what speed they are on.
so that I could decide if this is possible for me to do
thanks
This was a fantastic way for me to transition to a full debian install. Thanks so much!
update:
I used this approach 4 times; on the 4th, a week after the other three, apt-get dist-upgrade downloaded everything, but then failed because of perl problems, spitting out stuff like along the lines of
debconf: Perl may be unconfigured [...]
Googling stuff suggested that perl was essential to the apt-get process, but that it also got hosed during the apt-get process, probably because stuff at Debian.org had changed some dependencies...
I am not sure what exactly fixed it (an hour of messing around, basically), but in the end I know it had to do with my manually installing perl from the
http://packages.debian.org/unstable/perl/
site -- at least enough to really break it by running dkpg -i on anything that had "perl" it (!), then running dkpg -f install to finally wake up and fix it! (initially, dkpg -f install would fail like everything else).
I know that's not a lot of detail, but if someone else gets in that position, it will be better than anything I found on the net. Moral of the story seems to be that you can get in to a catch-22 situation when updating perl, and that by manually installing at deb or two, you can get dkpg -f install working enough again to actually fix it for you.
could some one give me some kind of idea of how much net time and what speed they are on.
so that I could decide if this is possible for me to do
thanks
I have DSL -- at around 170kps, downloading took about an hour, I guess. I can't imagine doing it with a dial-up connection.Originally Posted by spottyrover
Hi i've tried to follow your upgrade to unstable but I do not seem to be getting anywhere
I hope someone can help
I am using a clean install of knoppix 3.6
installed to hard drive by sudo knoppix-installer
I cahanged the source list to
# /etc/apt/sources.list for Knoppix
# If you want to do a "full upgrade", you should first
# upgrade the Packages from Debian/unstable (KDE & Co.)
# before doing a (dist-)upgrade for Debian/testing.
#
# See sources.list(5) for more information, especialy
# Remember that you can only use http, ftp or file URIs
# CDROMs are managed through the apt-cdrom tool.
# Security updates for "stable"
deb http://security.debian.org stable/updates main contrib non-free
deb http://security.debian.org testing/updates main contrib non-free
## Stable
#deb http://ftp.de.debian.org/pub/debian stable main contrib non-free
#deb http://ftp.de.debian.org/pub/debian-non-US stable/non-US main contrib non-free
# Stable Sources
#deb-src http://ftp.de.debian.org/pub/debian stable main contrib non-free
#deb-src http://ftp.de.debian.org/pub/debian-non-US stable/non-US main contrib non-free
# Testing
#deb http://ftp.de.debian.org/pub/debian testing main contrib non-free
#deb http://ftp.de.debian.org/pub/debian-non-US testing/non-US main contrib non-free
# Testing Sources
#deb-src http://ftp.de.debian.org/pub/debian testing main contrib non-free
#deb-src http://ftp.de.debian.org/pub/debian-non-US testing/non-US main contrib non-free
# Unstable
#deb http://ftp.de.debian.org/debian unstable main contrib non-free
#deb http://ftp.de.debian.org/debian-non-US unstable/non-US main contrib non-free
# Unstable Sources
#deb-src http://ftp.de.debian.org/debian unstable main contrib non-free
#deb-src http://ftp.de.debian.org/debian-non-US unstable/non-US main contrib non-free
# Experimental
#deb http://ftp.de.debian.org/debian ../project/experimental main contrib non-free
# Experimental Sources
#deb-src http://ftp.de.debian.org/debian ../project/experimental main contrib non-free
# Java
#deb ftp://ftp.gwdg.de/pub/languages/java/linux/debian woody main non-free
#deb-src ftp://ftp.gwdg.de/pub/languages/java/linux/debian woody main non-free
#deb ftp://ftp.gwdg.de/pub/languages/java/linux/debian unstable main non-free
#deb-src ftp://ftp.gwdg.de/pub/languages/java/linux/debian unstable main non-free
## More wireless stuff
# deb http://debian.isg.ee.ethz.ch/public woody madwifi
# deb-src http://debian.isg.ee.ethz.ch/public woody madwifi
# deb http://debian.isg.ee.ethz.ch/public woody airo-mpi
# deb-src http://debian.isg.ee.ethz.ch/public woody airo-mpi
# deb ftp://ftp.tcweb.org/pub/debian unstable main
# deb-src ftp://ftp.tcweb.org/pub/debian unstable main
## NX stuff
# deb http://www.kalyxo.org/debian/ experimental main
# ndiswrapper
# deb http://rigtorp.se/debian unstable/
# deb-src http://rigtorp.se/debian unstable/
## Blades Repository (pppoeconf & co)
# deb http://people.debian.org/~blade/testing ./
# deb-src http://people.debian.org/~blade/testing ./
## deb cdrom:[Debian GNU/Linux 2.2 r3 _Potato_ - Official i386 Binary-1 (20010427)]/ unstable contrib main non-US/contrib non-US/main
## Knoppix special packages resource at LinuxTag HQ
# deb http://developer.linuxtag.net/knoppix ./
# deb-src http://developer.linuxtag.net/knoppix ./
# deb http://snapshot.debian.net/archive pool gcc
# deb-src http://snapshot.debian.net/archive pool gcc
#steve
#Official-Stable
deb http://ftp.debian.org/debian/ stable main contrib non-free
deb http://non-us.debian.org/debian-non-US/ stable/non-US main contrib non-free
#Official-testing
deb http://ftp.debian.org/debian/ testing main contrib non-free
deb http://non-us.debian.org/debian-non-US/ testing/non-US main contrib non-free
#Official-UnStable
deb http://ftp.debian.org/debian/ unstable main contrib non-free
deb http://non-us.debian.org/debian-non-US/ unstable/non-US main contrib non-free
and the apt.conf to:
APT:efault-Release "unstable";
APT::Cache-Limit 10000000;
Apt::Get::Purge;
then I did a apt-get update
with the result of
root@box:~# apt-get update
Err http://security.debian.org stable/updates/main Packages
Could not connect to security.debian.org:80 (1.0.0.0), connection timed out
etc
could some one tell me what I am dooing wrong
by the way I can surf the net ok with adsl via a lan so I assume that my connection is ok
thanks
sorry.... i am a newbie.... how do i change the line APT:efault-Release "testing"; to APT:efault-Release "unstable";. ..... my internet connection is pretty fucked up and i cannot get it detected before logging in to kde and configuring it myself...... so i cant log in console and do like what the instructions said....... so i edited sources.list while in kde.... but im still finding out how to change that line.... anyone can help me ?
CORSAIR Vengeance LPX 32GB 2x16GB DDR4-2666 PC4-21300 288Pin 2666Mhz Memory Ram
$99.99
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
HyperX FURY DDR3 8GB 16GB 32GB 1600 MHz PC3-12800 Desktop RAM Memory DIMM 240pin
$12.90
Crucial DDR3L 16GB 1600 2x 8GB PC3-12800 Laptop SODIMM Memory RAM PC3 16G DDR3
$21.50
Crucial 16GB (2x 8GB) Kit DDR3L 1600MHz PC3-12800 UDIMM Desktop 240-Pin CL11 RAM
$23.33
Lot of 2 32GB DDR4 2666 PC4-21300 SODIMM RAM Modules Mixed Brand
$60.00
8GB PC3L-12800S 1600MHz SODIMM DDR3 RAM | Grade A
$12.00
HyperX FURY RAM DDR4 16GB 8GB 32GB 4GB 3200 2666 2400 2133 Desktop Memory DIMM
$14.85
Lot of 50 4GB DDR3 PC3 Sticks Desktop Ram - mixed speeds and brands
$88.00
HyperX FURY DDR4 8GB 16GB 32GB 3200MHz PC4-25600 Desktop RAM Memory DIMM 288pins
$72.93