What types of partitions and what version of Windows do you think that you have out there on the hard drive? If you still have Windows installed, can it boot and mount the partitions?
I am a newbie and have some problems mounting a hard drive. My first attempt running Knoppix from the CD worked fine. The drives mounted and I was able to see the folders. After some more testing and rebooting I now get the error:
"Could not mount device. The reported error was:
Mount: wrong fs type, bad option, bad superblock on /dev/hda1, or too many mounted file systems."
Some of the things I did on previous sessions:
1. Marked drives as Read/Write
2. Attempt to setup LISA with the Wizard
3. Downloaded a file from the Internet into the tmp folder
What types of partitions and what version of Windows do you think that you have out there on the hard drive? If you still have Windows installed, can it boot and mount the partitions?
---
Verifying of md5 checksum and burning a CD at slow speed are important.
Thanks for the quick response.
This laptop is a Compaq Presario running Windows Home. My client owns this laptop and picked up a virus a couple of days ago which wiped out the C: drive directory. I am trying to use Knoppix to recover some files to another PC on my network and then reinstall Windows.
Because there is no directory the boot sequence cannot find any files and hangs with a screen full of warnings about missing files.
I thought I was in luck with Knoppix but since I am just learning how to use it I must have done something wrong and now it will not mount the hard drives. Prior to this I was getting the full file names of everything on the hard drive and was ready to grab some files.
I tried to hook up an external drive to the USB port but it did not recognize it. Then on reboot to try something else I got the mount error.
I hope I haven't accidently written over the hard drive when I set it to Read/Write.
Originally Posted by flowergardenerBy "Windows Home" I am guessing that you mean XP home. As you didn't say otherwise I'll conclude that it has the default NTFS partitions for XP rather than FAT.Originally Posted by flowergardener
Linux cannot safely write to NTFS partitions. This is apparently by Microsoft's design and something they are going to a lot of work to maintain. Knoppix by default mounts them read only. I'm unsure how you were able to make the partitions read-write as most users report that Knoppix will not let them do this at all; but if you really did so and wrote to the disk you most likely destroyed any information that was left. Why you would try installing Lisa and downloading files from the Internet when what you now say you wanted to do was recover data from an already flakey system isn't at all clear, but it does sound like you had access to all the files but now the NTFS partition has been ruined.
Yes. The OS is Windows XP Home with NTFS.
I tried installing LISA because Knoppix said I needed to run LISA in order to access my network. Then I set the drives to Read/Write thinking I could rename some of the files and find them from Windows. Silly me. I did not realize that this would be a problem.
Since your message someone said to try SAMBA which I did. This attempted to set up the drive as shared. Now the hard drives don't show up at all in Knoppix.
Yes. As I understand it, even though Windows XP frequently fails in the way that you described, Microsoft is going to extradonary lengths to be sure that Linux cannot safely write to NTFS partitions. People have tried some things, such as captive NTFS using the NTFS drives from Windows, but I guess that thanks to service pack "updates" Microsoft has been able to keep even this from working. There are techniques that we use to recover files from a Windows system when Windows no longer boots, but I know of no way to recover the data now that you have written to the partition with Linux.Originally Posted by flowergardener
You and your client don't want to hear this right now, but this is not completely unexpected when running an OS like XP that is well known to just suddenly refuse to boot or access it's own files, and not having good backups. Windows is not ready for the desktop.
HP Workstation Z640 2x Xeon E5-2623V4 32GB Ram 2x 256GB SSD Quadro 2000 Linux GA
$249.99
Intel Xeon Gold 6146 3.2Ghz 12-Core 165W FCLGA3647 CPU/Processor SR3MA
$254.99
Intel Xeon E5-2697 v4 2.3GHz 18-Core Processor CPU LGA2011 SR2JV
$49.99
HP Z230 Workstation Towers Xeon E3-1231 V3 3.20ghz 8GB Ram NO HDD
$39.96
SR1XP Intel Xeon E5-2680 v3 12 Core 30MB 2.5GHz LGA 2011-3 Grade A Processor
$3.87
Genuine Intel Xeon E5-2680V4 2.40Ghz 14-Core 35MB LGA2011 CPU P/N: SR2N7
$14.99
Intel Xeon E7-8890 V4 2.20GHz 24-Core 60MB LGA2011 Server CPU Processor SR2SS
$29.99
Intel Xeon E5-2667 V2 LGA 2011 3.3GHz 8 Core 130W 25MB 8GT/s CPU Processor
$14.99
Dell T7810 Workstation 1x E5-2603 v3 16GB RAM Nvidia QUADRO +cables
$120.00
Dell Poweredge R730xd LFF 14-Bay 2U Server | Choose Your CPU & RAM Config
$474.99