boot with the cheatcode: knoppix nodhcp
It should get past that point because now it won't get IP for both eth0 & eth1.
Once knoppix is loaded, run the command netcardconfig and tell it to use dhcp on eth0.
i've gotten my CD to work on one of my PCs (except networking did not work), but when booting on my AVERATEC 3200 Series Laptop, when it gets to the network devices i get:
then it hangsCode:Network Device eth0 detected, DHCP broadcasting for IP (Backgrounding) Network Device eth1 detected, DHCP broadcasting for IP
im assuming that 'eth1' is my wireless card...
any ideas?
thanks in advance,
~Dark Dragon
boot with the cheatcode: knoppix nodhcp
It should get past that point because now it won't get IP for both eth0 & eth1.
Once knoppix is loaded, run the command netcardconfig and tell it to use dhcp on eth0.
Grandstream GS-HT802 2 Port Analog Telephone Adapter VoIP Phone & Device, Black
$32.00
Lot of 7 Cisco IP Phone 7911 CP-7911G VoIP Business Display Desktop Phone
$175.00
NEW Polycom VVX 501 VoIP IP Phone & Stand Tested VVX501 2200-48500-019 Lync
$43.98
Obihai OBI200 1-Port VoIP Phone Adapter
$34.99
Cisco CP-7945G VOIP Phone With Stand & Handset Business IP Phone 7945
$3.00
New Cisco 7945G IP VoIP Gigabit GIGE Telephone Phone CP-7945G -
$24.95
Yealink SIP-T54W W/ HD Display Business VoIP Phone w/ Built-in Bluetooth and POE
$69.99
Poly CCX 700 IP Phone OpenSIP - VoIP Phone (2200-49750-025)
$189.98
Polycom VVX 411 VoIP IP Phone & Stand Tested Reset VVX411 2201-48450-001
$19.98
Lot Of 5 Phones: Yealink SIP-T29G 10-Lines Color IP Phone
$63.99