-
Re: and Nessus 2.01
![Quote](images/misc/quote_icon.png)
Originally Posted by
shawngiese
When did they update that? This is great, a hot network testing tool on a CDROM! It works great and can bombard my network routers quickly from just about anywhere! Knoppix may be the only reason I buy a USB drive :)
I'm a 1/2-newbie. Linux since '97, but only now departing Windows.
What great tool do you mean? Nessus 2.01? You found it on Knoppix v3.1?
I have a USB drive and I would like to save my Knoppix configuration between boots. Where can I find out how to do this?
-
output from cdrecord
this is the output from cdrecord ...
root@banstyle:/mnt/hda2/iso# cdrecord --verbose --dev=0,0 --speed=8 miniwoody.iso
Cdrecord 2.01a10 (i686-pc-linux-gnu) Copyright (C) 1995-2003 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.7'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'PLEXTOR '
Identifikation : 'CD-R PX-W8432T'
Revision : '1.09'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : MMC SWABAUDIO
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 2394336 = 2338 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 174 MB
Total size: 200 MB (19:49.57) = 89218 sectors
Lout start: 200 MB (19:51/43) = 89218 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, high Beta category (A+) (3)
ATIP start of lead in: -11634 (97:26/66)
ATIP start of lead out: 359846 (79:59/71)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359846 Blocks current: 359846 Blocks remaining: 270628
Starting to write CD/DVD at speed 8 in real TAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0
Track 01: 174 of 174 MB written (fifo 100%) [buf 96%] 8.4x.
Track 01: Total bytes read/written: 182714368/182714368 (89216 sectors).
Writing time: 160.916s
Average write speed 7.7x.
Min drive buffer fill was 94%
Fixating...
Fixating time: 35.679s
cdrecord: Input/output error. plextor get speedlist: scsi sendcmd: no error
CDB: EB 00 00 00 00 00 00 00 00 0A 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 20 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x20 Qual 0x00 (invalid command operation code) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 40s
cdrecord: fifo had 2878 puts and 2878 gets.
cdrecord: fifo was 0 times empty and 2003 times full, min fill was 95%.
root@banstyle:/mnt/hda2/iso#
-
Re: and Nessus 2.01
![Quote](images/misc/quote_icon.png)
Originally Posted by
brian03
![Quote](images/misc/quote_icon.png)
Originally Posted by
shawngiese
When did they update that? This is great, a hot network testing tool on a CDROM! It works great and can bombard my network routers quickly from just about anywhere! Knoppix may be the only reason I buy a USB drive
![Smile](images/smilies/icon_smile.gif)
I'm a 1/2-newbie. Linux since '97, but only now departing Windows.
What great tool do you mean? Nessus 2.01? You found it on Knoppix v3.1?
I have a USB drive and I would like to save my Knoppix configuration between boots. Where can I find out how to do this?
Nope I found it on 3.2. Nessus is fully described at http://www.nessus.org/ . The latest version is 2.05 but 2.01 is fine for now.
As for the USB drive. I have yet to buy it but am seriously thinking about it.
-
Senior Member
registered user
Re: and Nessus 2.01
[quote="brian03"]
![Quote](images/misc/quote_icon.png)
Originally Posted by
shawngiese
I have a USB drive and I would like to save my Knoppix configuration between boots. Where can I find out how to do this?
It just gets mounted as a scsi drive (sd??) where ?? = drive letter and partition number. Use the search box in the upper right for more information it has been posted and discussed before.
-
Re: Persistent Home Directory & Other Config Saves
[quote="Stephen"]
![Quote](images/misc/quote_icon.png)
Originally Posted by
brian03
![Quote](images/misc/quote_icon.png)
Originally Posted by
shawngiese
I have a USB drive and I would like to save my Knoppix configuration between boots. Where can I find out how to do this?
It just gets mounted as a scsi drive (sd??) where ?? = drive letter and partition number. Use the search box in the upper right for more information it has been posted and discussed before.
I was not clear. Sorry. My USB drive works great under Knoppix. But having that, I don't know how to save/restore configuration between boots. I've read of boot parameters myconfig=~ and home=~, but my Knoppix (v3.1) appears to ignore them, and they don't show in the "cheat sheet" documentation.
BTW, I keep selecting to view directories on the KDE desktop as lists rather than icons, but the selection won't "stick". How can I make this a saved preference?
-
Re: Persistent Home Directory & Other Config Saves
[quote="brian03"]
![Quote](images/misc/quote_icon.png)
Originally Posted by
Stephen
![Quote](images/misc/quote_icon.png)
Originally Posted by
brian03
![Quote](images/misc/quote_icon.png)
Originally Posted by
shawngiese
I have a USB drive and I would like to save my Knoppix configuration between boots. Where can I find out how to do this?
It just gets mounted as a scsi drive (sd??) where ?? = drive letter and partition number. Use the search box in the upper right for more information it has been posted and discussed before.
I was not clear. Sorry. My USB drive works great under Knoppix. But having that, I don't know how to save/restore configuration between boots. I've read of boot parameters myconfig=~ and home=~, but my Knoppix (v3.1) appears to ignore them, and they don't show in the "cheat sheet" documentation.
BTW, I keep selecting to view directories on the KDE desktop as lists rather than icons, but the selection won't "stick". How can I make this a saved preference?
Cancel that. I used the forum search function and found a bunch to read. Let me digest that. I'll repost if I still can't figure it out. (But I am still interested in how to make the folder list view stick!)
-
Junior Member
registered user
qtparted is great!
I am happier than ever with my Knoppix CD. The 2003-05-03 build was the first 3.2 build I have tried. It is more eye-catching than ever.
With qtparted I can now resize my NTFS partition to make room for linux without using an unlicensed copy of Partition Magic. This does wonders for my conscience, and I love having one more reason I can use to get people to try Knoppix (and thus linux).
Similar Threads
-
By kx14386 in forum Laptops
Replies: 5
Last Post: 09-07-2003, 10:47 AM
-
Replies: 9
Last Post: 08-18-2003, 01:28 PM
-
By jedovaty in forum Hardware & Booting
Replies: 2
Last Post: 06-12-2003, 06:36 PM
-
Replies: 13
Last Post: 04-14-2003, 04:03 AM
-
Replies: 14
Last Post: 04-11-2003, 02:33 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![IBM System X3250 M3 Server 8GB RAM Intel Xeon x3440 2.53ghz (NO HDD) picture](/store/img/g/M~sAAOSwFVlkVr-r/s-l225/IBM-System-X3250-M3-Server-8GB-RAM-Intel-Xeon-x344.jpg)
IBM System X3250 M3 Server 8GB RAM Intel Xeon x3440 2.53ghz (NO HDD)
$41.99
![IBM Power S822 8284-22A 12SFF Power8 3.89GHz 6Core 64GB RAM No HDD Server System picture](/store/img/g/xiEAAOSwwGtmRmN6/s-l225/IBM-Power-S822-8284-22A-12SFF-Power8-3-89GHz-6Core.jpg)
IBM Power S822 8284-22A 12SFF Power8 3.89GHz 6Core 64GB RAM No HDD Server System
$359.99
![1U IBM x3550 M5 4 Bay SFF SAS3 Server 2x E5-2683 V3 28 Core 128GB DDR4 2x Tray picture](/store/img/g/RRoAAOSwonVguq4o/s-l225/1U-IBM-x3550-M5-4-Bay-SFF-SAS3-Server-2x-E5-2683-V.jpg)
1U IBM x3550 M5 4 Bay SFF SAS3 Server 2x E5-2683 V3 28 Core 128GB DDR4 2x Tray
$318.00
![IBM Server System X3100 M4 | Xeon @ 3.10 Ghz | 8GB | 250GB HDD No OS (IG-PC26) picture](/store/img/g/vCUAAOSwSJhlCJV3/s-l225/IBM-Server-System-X3100-M4-Xeon-3-10-Ghz-8GB-250GB.jpg)
IBM Server System X3100 M4 | Xeon @ 3.10 Ghz | 8GB | 250GB HDD No OS (IG-PC26)
$96.01
![IBM System x3550 M3 Dual Intel Xeon X5650 @2.67GHz 32GB RAM No HDD picture](/store/img/g/oRsAAOSw~pRmQitC/s-l225/IBM-System-x3550-M3-Dual-Intel-Xeon-X5650-2-67GHz-.jpg)
IBM System x3550 M3 Dual Intel Xeon X5650 @2.67GHz 32GB RAM No HDD
$74.50
![ibm server z series picture](/store/img/g/RKAAAOSw365hbg9L/s-l225/ibm-server-z-series.jpg)
ibm server z series
$16000.00
![IBM SYSTEM X3250 M2 4194PDS Server CORE2 QUAD Q9400 2.6GHz 2GB SEE NOTES picture](/store/img/g/1WgAAOSwLcZmXe8D/s-l225/IBM-SYSTEM-X3250-M2-4194PDS-Server-CORE2-QUAD-Q940.jpg)
IBM SYSTEM X3250 M2 4194PDS Server CORE2 QUAD Q9400 2.6GHz 2GB SEE NOTES
$53.16
![IBM Server eServer | IBMR1000 | UPS 1000VA 700W -Without Batteries picture](/store/img/g/I34AAOSwbmxiYp2z/s-l225/IBM-Server-eServer-IBMR1000-UPS-1000VA-700W-Withou.jpg)
IBM Server eServer | IBMR1000 | UPS 1000VA 700W -Without Batteries
$115.00
![IBM 9402 Server Y10 picture](/store/img/g/R2QAAOSwYpxd~S~9/s-l225/IBM-9402-Server-Y10.jpg)
IBM 9402 Server Y10
$10000.00
![IBM 5362 Server System/36 60MB HDD With Manuals picture](/store/img/g/afoAAOSwy6dd~SJ4/s-l225/IBM-5362-Server-System-36-60MB-HDD-With-Manuals-.jpg)
IBM 5362 Server System/36 60MB HDD With Manuals
$11000.00