I read that knoppix can use INITRAMFS..But minirt.gz isn't an archive of INITRAMFS
Hi!
I have a little question about booting of knoppix...
Well, start with theory of booting with Initrd:
- kernel load into memory initrd image
- decompress it
- execute LINUXRC (yes, must be an executable or shell file called linuxrc )
- after that or linuxrc call /sbin/init or it's called automatically, otherwise kernel panic
Pratically
- knoppix put in boot command line a line like init=/etc/init
After many test that I do, I see the param init (in this case /etc/init) it's execute only if present another param like root=/dev/ram0
I see /etc/init in INITRD of knoppix contain a small script like
Hi!Code:/linuxrc exec /sbin/init < /dev/console > /dev/console ...
I have a little question about booting of knoppix...
Well, start with theory of booting with Initrd:
- kernel load into memory initrd image
- decompress it
- execute LINUXRC (yes, must be an executable or shell file called linuxrc )
- after that or linuxrc call /sbin/init or it's called automatically, otherwise kernel panic
Pratically
- knoppix put in boot command line a line like init=/etc/init
After many test that I do, I see the param init (in this case /etc/init) it's execute only if present another param like root=/dev/ram0
I see /etc/init in INITRD of knoppix contain a small script like
I think that script and relative boot parameter is useless, infact knoppix boot correctly without "init" file in /etc and without bootparam "init=/etc/init".Code:/linuxrc exec /sbin/init < /dev/console > /dev/console ...
But..my question is: if it's useless, why is still present?
I'm forgot something?
Cheers
I read that knoppix can use INITRAMFS..But minirt.gz isn't an archive of INITRAMFS
Confirmed. Knoppix 4.0.2 will boot just fine without the "init=..."Originally Posted by Frunktz
Probably a vestige. Naturally, you're free to take in out in your own remasters.But..my question is: if it's useless, why is still present?
I'm forgot something?
Regards,
- Robert
http://www.cwelug.org
Dell PowerEdge FX2S FC830 Blade Server Chassis Enclosure 2*2000W PSU NO BLADES
$209.99
HPE ProLiant BL460c Gen8 735151-B21 E5-v2 Blade Server LOADED w 512 GIGS MEMORY
$280.00
DELL PowerEdge VRTX Blade Server Chassis SEE NOTES
$610.00
Dell PowerEdge MX740C Blade Server CTO Chassis H730P
$299.00
Dell PowerEdge FC830 blade server with 4x processors E5-4669v3 no memory
$189.00
Dell PowerEdge M520 Blade Server, 1x Intel Xeon E5-2420V2, NO RAM
$17.50
DELL PowerEdge M910 Blade Server TWO E7-2870 2.4GHZ 256GB Memory NO HD
$210.00
ZimaBoard 432 Single Board Server / SATA Y adapter / DisplayPort to HMDI adapter
$90.00
Dell PowerEdge M620 Blade Server Module BAREBONES (NO CPU, RAM, HDD, CADDY)
$29.74
CISCO UCSB-B200-M3 UCS B200 M3 BLADE SERVER 2x Xeon E5-2650 2GHz 256GB RAM
$143.65