To all out there.. I'm a netware admin, who uses netware and M$ stuff, but a Linux newbe. I need to simulate a poor link with ping times in excess of 1000ms (actually seen them upto 3000ms via sat) and bandwidth down to 64k. I thought I had found the solution in dummynet that uses ipfw. unfortunatly the floppy image supplied did not work with any of the processors in the office. (P4s). I can accross KNOPPIX as a possible contender as it can run from CD.
I have a dell PC with 2 network cards. what do I need to route between them, in such a way that I can simulate my links?
Thanks in advance
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
HPE 869102-001 Smart Array E208i-a SR Gen10 Storage Controller RAID SP: 871039
$116.99
Lot of 4 - Genuine Dell (62P9H) PERC H710 512MB Mini Blade 6Gbps SAS Raid
$44.99
Lot of 2 -Dell P2R3R PERC H330 Mini Mono 12Gbps SAS Non-raid Controller 0P2R3R
$35.99
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$82.49
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
NEW LSI MEGARAID SAS 9361-8i 12GB/s SAS + SATA RAID CONTROLLER CARD PCIe x8 3.0
$99.00