You could always have typed netcardconfig to run the script to configure your card.Originally Posted by alexcg
How about installing Gnome System Tools by default? I spent ages messing around on the console trying to set my IP number and netmask, when I could have saved hours by just using the network module of the system tools. It provides an interface very similar to the windows network control panel.
GST also includes configuration for:
* Users and groups
* Date and time
* Network configuration
* Bootloaders
* Runlevels
I'm not sure if all of these run okay on knoppix, but I know for sure that network config does.
You could always have typed netcardconfig to run the script to configure your card.Originally Posted by alexcg
Stephen is right. If you just go to Knoppix, Configure in Kmenu (or run netcardconfig from the command line) you will have access to tools to confiigure your ethernet card. Most other config stuff can be done quite well in the KDE Control Center.
For a wireless network card use wlcardconfig or look in the same place in Kmenu.
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$712.98
Dell Poweredge R640 Server | 2x Xeon Gold 6132 | 128GB | H730P | 8x HDD Trays
$1849.00
H261-Z61 2U 24SFF AMD Server 8x EPYC 7551 256-Cores 256GB RAM 8x25G NIC 2x2200W
$2612.18
Dell Poweredge R640 Server | 2x Xeon Gold 6132 | 512GB | H730P | 8x HDD Trays
$2549.00
HP Proliant DL360 Gen9 28 Core SFF Server 2X E5-2680 V4 16GB RAM P440ar No HDD
$196.95
Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB
$510.00
DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45
$274.00
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
HP ProLiant DL380 Gen9 16SFF 2x E5-2680v4 2.4GHz =28 Cores 64GB P840 4xRJ45
$353.00