-
Junior Member
registered user
Questions on setting up a Persistant Hard drive image
Now that I've gotten Knoppix to work and connect to the net I need to do a couple of other things to finish setting up for regular use. I am using Knoppix version 4.0.2. First off, I have available on my hard drive a FAT formatted 10GB partition that can be dedicated to Knoppix/Linux use. Since I would prefer to free up my CD drive I need to transfer the Knoppix image to that hard drive partition and use the boot time cheat code. Am I correct in thinking that this should be done before I set up the persistant disc image/home directory with the persistant image using only the space remaining after transferring the Knoppix image? How to best go about this? Use a single partition or divide it into two? Second, when booting the system should the cheat codes for FromHD and Home=scan be entered separately or combined and if combined what would be the correct format?
Thanks,
Alice R.
-
Senior Member
registered user
Re: Questions on setting up a Persistant Hard drive image
To create a persistant image use the 'tohd' cheatcode, and then the 'fromhd' one. To have the remaining hd space avaible for persistent home (or other data) you have to create a separate partition because knoppix mount in read_only mode the which one that contain knoppix loop image.
Cheatcodes have to be typed in a way like this **knoppix fromhd=/dev/hda1 config=scan lang=en** therefore separatly.
-
Junior Member
registered user
Persistant Image success...
Partly in the interest of keeping things simple and because a friend has given me a stand alone CD burner thus making freeing up the CD drive a moot point I've successfully run the mkimage script and am kind of glad I didn't try to divide that 10GB partition that I set aside for it - The image as it stands now is well over 4GB and will grow as I customize and add things to the basic Knoppix setup - better some growing room! Thanks to all who offered advice and answers when I needed them.
Similar Threads
-
By johnmd in forum Tips and Tricks
Replies: 3
Last Post: 12-05-2010, 04:38 PM
-
By BrianC in forum General Support
Replies: 11
Last Post: 12-13-2005, 08:28 PM
-
By rstoeck in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 09-17-2004, 05:49 AM
-
By punkass in forum General Support
Replies: 2
Last Post: 05-08-2004, 05:20 PM
-
By bruceg in forum Hardware & Booting
Replies: 2
Last Post: 05-06-2004, 03:51 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Cisco SG110 24 Port Gigabit Ethernet Switch w/ 2 x SFP SG110-24
$117.00
1783-SFP1GTE AB 1G copper SFP #ZYPL
$879.87
Cisco SF350-08 8-Port Managed 10/100 Switch SF350-08-K9-NA
$164.00
Cisco 110 24 Port 10/100 Ethernet Switch with 2 x SFP SF112-24-NA
$90.00
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*
$18.00
Cisco SFP-10G-LR-S SFP+ 1310nm 10km DOM Transceiver Module 10-3107-01 - 1 Year
$41.59
Genuine Cisco SFP-10G-SR Transceiver Module (10-2415-03)
$5.65
LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module
$89.00
Cisco Meraki MA-SFP-10GB-SR 10G SFP+ SR 850nm 300m LC MMF
$29.99