Hello all,
Tring to get my wireless going for my Acer Aspire 3000 it uses the broadcom internal wireless. Here's what I've done so far:
1) Used ndwrapper to load the driver it tells me driver accepted then to use the wlan config
2) Ran wlan config input my ESSID, WEP Channel ect all taken well
3) Run network card ap for wlan0 dchp discovery yes and it says is failed?
4) When I look at KWireless manager it show my card powered up it sees my network my wep my channnel but it says no access point available?
Any ideas as a side note xandros OCE works with my internal wireless card
-Eric
Dell PowerEdge FX2S FC830 Blade Server Chassis Enclosure 2*2000W PSU NO BLADES
$299.99
Dell PowerEdge M620 Blade Server 2x 10C E5-2690v2 64GB Ram 2x 600GB 10k HDD
$125.00
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
Dell PowerEdge C6320 82F9M Server Blade Module 10gb SFP+ 082F9M
$79.99
Dell PowerEdge M620 Blade Server 2 x Xeon e5 2665 8 x 16 GB(128) RAM - No HD
$44.99
Dell PowerEdge M520 Blade Server Xeon E5-2403 NO HDD NO RAM
$40.00
Dell PowerEdge FC830 8-SFF 4*Xeon E5-4669v3 2.1GHz No HDD/RAM Blade Server Node
$199.99
Dell PowerEdge M610 Blade Server E5620@2.2GHZ (6x)8GB RAM (2x)146GB 15K SAS HDD
$79.00
HP P17342-B21 M750 E2286M CTO BLADE SERVER
$269.95
HP ProLiant BL460c Gen9 Blade 2x E5-2690v4 2.6GHz =28 Cores 32GB P246 650FLB
$223.00