and before you say it, yes, i've unchecked the "read only" box and set owner/group/others to "read and write" but i'm STILL doing something wrong ...
I apologize for the elementary question.
Hi.
I have used Knoppix to boot a computer which has a Linux (Debian) hard drive which currently refuses to boot ... I want to copy some of the files to a USB thumb drive to try to recover them ... but I can't get them to copy ... sometimes I get the message that I can't read the file I want to copy, and other times I get the message that I can't write to the device ....
I'm sure I'm doing something stupid, but I can't figure it out .... can anyone help, or point me to a howto that might get me started?
thanks
and before you say it, yes, i've unchecked the "read only" box and set owner/group/others to "read and write" but i'm STILL doing something wrong ...
I apologize for the elementary question.
If your trying to save data from a dying hard drive, consider getting a gmail account and emailing yourself the critically important stuff, rather than tryng to get knoppix to figure out your hardware. Gmail gives you 2 gigs of storage. Yahoo will give you another gig or so for free.
Otherwise how is your usb stick formatted? You could post the output (froom a root sheel) of fdisk -l, and maybe : df (disk free). Also : mount.
HTH
in addition, you might check to make sure the usb drive is not formated in ntfs instead of fat32. also, the checkmarks are not enough to make the drive writable. (depending on your release version) you need to right click on the drive and select 'actions' and 'make drive read write' <- or something similar.
before you try copying critical files, create a small text file (call it 'test' or some such) with one of the many text editors provided in knoppix and see if you can save it to your thumb drive. if you can, then you will be able to write the files you are attempting to salvage.
not too sure why you might be getting the 'can't read file' message, but maybe the above information will give you a little more to go on.
there's probably a slick shell command that will allow the drive to be mounted as writable, but i don't know if your standard "mount mnt/dev/" string will do that or not. have to try that myself next time i drop into knoppix.
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
Intel PCIe SSD AIC RAID Controller Card G97168-252
$44.55
Cisco UCS LSI MegaRAID 9271CV-8I SAS2308 PCIe SAS Internal RAID Controller
$28.00
Oracle 7085209 LSI MegaRAID SAS 9361-8i 1GB Cache 12Gbps SAS/SATA PCIe RAID Card
$28.20
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$82.49
4 Bay RAID External Hard Drive Enclosure for 2.5/3.5" SATA HDD/SSD
$79.99
2 Bay RAID Hard Drive Enclosure USB 3.0 Type-B for 2.5" SATA SSD/HDD Enclosure
$59.99