If it's a Synaptics pad then
<code>
synclient TouchpadOff=1
</code>
can help. If it does, put that into .bash_profile or .profile of your $HOME .
I run Knoppix 4.0.2 from CD on laptop (Compaq Presario 716). I created a persistent copy of home directory on HDD. I wonder if there is a way to disable tap-to-click feature of my touchpad and keep it stored, so the system will "remember" this next time I boot from CD?
tia
Mihal
If it's a Synaptics pad then
<code>
synclient TouchpadOff=1
</code>
can help. If it does, put that into .bash_profile or .profile of your $HOME .
Unfortunately it didn't help. I got the following:
knoppix@3[knoppix]$ synclient TouchpadOff=1
Can't access shared memory area. SHMConfig disabled?
I looked for SHMConfig and I found that I need following line in XF86Config:
Option "SHMConfig" "on"
The problem is I cannot edit this file in live-cd distribution. Well, I also found some suggestions that
Option "MaxTapTime "0"
in /etc/X11/XF86Config-4 might help, but this is again the same problem.
Any other ideas?
Mihal
Here is how I finally did it:
One must edit /etc/X11/XF86Config-4 file. This must be done as a root of course. Then do the following:
1) in section "ServerLayout" add the line:
InputDevice "Synaptics" "AlwaysCore"
2) in section "Module" add the line:
Load "synaptics"
3) create the following section:
Section "InputDevice"
Identifier "Synaptics"
Driver "synaptics"
Option "TouchpadOff" "1"
EndSection
To keep this setting when computer is rebooted one must save configuration. In KDE manager choose KNOPPIX->Configure->"Save KNOPPIX Configuration"
Then next time when Knoppix is started one should type "knoppix myconfig=...." to restore this configuration.
Thanks angor, it looks like your suggestion was more or less like this.
Cisco Meraki MA-SFP-1GB-SX 1000BASE-SX SFP Transceiver Module
$24.99
Cisco GLC-FE-100FX-RGD 100BASE-FX SFP Transceiver Module
$17.99
Cisco GLC-GE-100FX 100BASE-FX SGMII SFP Transceiver Module
$83.99
Cisco SFP-10/25G-CSR-S 10/25GBASE-CSR SFP28, 850nm, 100m, LC,
$54.00
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
SFP-10G-SR Original Cisco 10GBASE-SR SFP+ V02 Multi mode Transceiver 10-2415-02
$5.00
10Gtek ASF-10G-T 10GBase-T 10GbE SFP+ to RJ-45 Copper Optical Transceiver Module
$35.99
Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC
$13.89
LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module
$89.00
NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*
$18.00