If it's a Synaptics pad then
<code>
synclient TouchpadOff=1
</code>
can help. If it does, put that into .bash_profile or .profile of your $HOME .
I run Knoppix 4.0.2 from CD on laptop (Compaq Presario 716). I created a persistent copy of home directory on HDD. I wonder if there is a way to disable tap-to-click feature of my touchpad and keep it stored, so the system will "remember" this next time I boot from CD?
tia
Mihal
If it's a Synaptics pad then
<code>
synclient TouchpadOff=1
</code>
can help. If it does, put that into .bash_profile or .profile of your $HOME .
Unfortunately it didn't help. I got the following:
knoppix@3[knoppix]$ synclient TouchpadOff=1
Can't access shared memory area. SHMConfig disabled?
I looked for SHMConfig and I found that I need following line in XF86Config:
Option "SHMConfig" "on"
The problem is I cannot edit this file in live-cd distribution. Well, I also found some suggestions that
Option "MaxTapTime "0"
in /etc/X11/XF86Config-4 might help, but this is again the same problem.
Any other ideas?
Mihal
Here is how I finally did it:
One must edit /etc/X11/XF86Config-4 file. This must be done as a root of course. Then do the following:
1) in section "ServerLayout" add the line:
InputDevice "Synaptics" "AlwaysCore"
2) in section "Module" add the line:
Load "synaptics"
3) create the following section:
Section "InputDevice"
Identifier "Synaptics"
Driver "synaptics"
Option "TouchpadOff" "1"
EndSection
To keep this setting when computer is rebooted one must save configuration. In KDE manager choose KNOPPIX->Configure->"Save KNOPPIX Configuration"
Then next time when Knoppix is started one should type "knoppix myconfig=...." to restore this configuration.
Thanks angor, it looks like your suggestion was more or less like this.
Cisco SG110 24 Port Gigabit Ethernet Switch w/ 2 x SFP SG110-24
$117.00
Mellanox 10/25GbE SFP28 Network Card MCX512A-ACAT ConnectX-5 EN Ethernet Adapter
$284.00
1783-SFP1GTE AB 1G copper SFP #ZYPL
$879.87
Cisco SF350-08 8-Port Managed 10/100 Switch SF350-08-K9-NA
$164.00
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*
$18.00
Cisco SFP-10G-LR-S SFP+ 1310nm 10km DOM Transceiver Module 10-3107-01 - 1 Year
$41.59
Genuine Cisco SFP-10G-SR Transceiver Module (10-2415-03)
$5.65
LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module
$89.00
Cisco Meraki MA-SFP-10GB-SR 10G SFP+ SR 850nm 300m LC MMF
$29.99