Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14

Thread: Download sends CD drive thrashing after 80mb

  1. #11
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441
    Quote Originally Posted by rollo11
    ...So downloading and burning CDs is always problematic under standard Knoppix? And there's no fix to make it possible?

    This is turning into an ordeal... The problem with net installations is that I have to issue a command to change the MAC address of my ethernet card. This wasn't possible for the net install of Suse. And when I tried a net install of Ubuntu (which is basically Debian, right?) I got an error during the installation ("Permission denied" when trying to run ./debootstrap). I have no idea what I am doing with Debian.

    At this point I am just looking for the path of least resistance to a HD-installed Linux. It's in order to keep my sanity. Downloading and burning a user-friendly distro looked like the best idea, but even that turns out impossible...

    Thanks for more pointers, I do appreciate you helping me.
    Downloading and burning under Knoppix is not always problematic under Knoppix, but there are issues one must consider. The most obvious is that Knoppix is a Live CD, intended as a way to introduce people to Linux or use as a portable or emergency system. But by it's nature it is normally in the CD drive, so if you try to burn a CD you have an issue if you remove the Knoppix CD. There are ways around this. If you have enough memory then you can use the toram cheat code to copy the entire Knoppix CD to memory (and then the CD can be removed to free up the drive). If you have multiple optical drives this may not be an issue at all. Or if you don't have enough RAM or multiple optical drives you can use another distro that is smaller like the Knoppix based DSL and the toram trick (yes, this doesn't reslove the issue of how to burn a DSL disc if you only have Knoppix). And if downloading and burning any ISO is an issue and you still have a floppy drive then you can even install Debian from the Internet with just a few Floppy disks to get you started. See http://www.debian.org/distrib/netinst
    ---
    Verifying of md5 checksum and burning a CD at slow speed are important.

  2. #12
    Junior Member registered user
    Join Date
    Feb 2006
    Posts
    18
    Well I made some progress. Hooray.

    Did two things, at least one of which meant I can now download to /mnt/sda3

    • * Gave write permission to /mnt/sda3 with a chmod 777 - why didn't Konqueror or Firefox issue a warning if this was the problem?
      * Setup up a generous swap file with the Knoppix app


    But the ordeal is not over... I may start a new thread, to keep to the rules.

    Thanks for the Toram cheat code hint. And for the latest Debian plug... But you didn't answer my question about whether there is access to a command line in the Debian installer. Because if there isn't then my netcard will not connect, and it will be a non-starter. Thanks again. I'm getting there.

  3. #13
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441
    Quote Originally Posted by rollo11
    .....But you didn't answer my question about whether there is access to a command line in the Debian installer. Because if there isn't then my netcard will not connect, and it will be a non-starter. Thanks again. I'm getting there.
    The reason I didn't answer a command line in the installer question is 1) I didn't see it. 2) I don't know, since the installer likes my network and just takes care of everything, but I do remember that quite a while back I did have to do some network configuration on an old installer and it let me do so, although I don't recall the details. and 3) I don't know what you have to do to make your network work. If it's something like manually setting your IP address then I don't expect any problem. If it's to compile and install a special NIC driver then I think you're s.o.l. Considering that the Debian Internet installer is about 8 meg and that you now have the toram magic to let you get at your CD burner (I'm assuming that you have enough RAM and it works for you since you seemed happy about this approach) why not try it rather than keep discussing it? By the way, I don't have enough RAM on any of my systems to use this with Knoppix but just used it with DSL and it worked fantastic.

  4. #14
    Junior Member registered user
    Join Date
    Feb 2006
    Posts
    18
    As described above (it's even pasted into your own post Harry), my network problem is that I have to change the MAC address in order to get a connection. This seems impossible using network install boot CDs.

    Well, the next batch of problems is just around the corner, but this one is solved. So thanks again.

Page 2 of 2 FirstFirst 12

Similar Threads

  1. new user sends privatemessage spam
    By abittner in forum The Lounge
    Replies: 5
    Last Post: 06-09-2009, 03:18 PM
  2. what to download ??
    By hero92 in forum Hardware & Booting
    Replies: 2
    Last Post: 08-27-2008, 08:22 PM
  3. What do I download?
    By mimes in forum General Support
    Replies: 2
    Last Post: 10-27-2004, 12:36 AM
  4. Download?
    By Cyazares in forum General Support
    Replies: 1
    Last Post: 04-28-2004, 07:53 AM
  5. Can't download
    By ramrom in forum General Support
    Replies: 1
    Last Post: 04-19-2003, 01:29 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE picture

1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE

$273.00



1U Supermicro Server X10DRU-i+ 2x Xeon Total 36 Cores 64GB 4x 10GBE-T 2PS picture

1U Supermicro Server X10DRU-i+ 2x Xeon Total 36 Cores 64GB 4x 10GBE-T 2PS

$314.00



Supermicro SYS-5019P-M Server Xeon Scalable 6138 20 Cores 40 Threads 48gb DDR4 picture

Supermicro SYS-5019P-M Server Xeon Scalable 6138 20 Cores 40 Threads 48gb DDR4

$330.00



SUPERMICRO CSE-512 AMD Opteron Processor 6128, 32GB DDR3 RAM NO HDD picture

SUPERMICRO CSE-512 AMD Opteron Processor 6128, 32GB DDR3 RAM NO HDD

$90.00



HP ProLiant Xeon E3-1220L V2 MicroServer Gen8 2.30 GHz 16 GB RAM NO DRIVES picture

HP ProLiant Xeon E3-1220L V2 MicroServer Gen8 2.30 GHz 16 GB RAM NO DRIVES

$199.00



Genuine HP ProLiant MicroServer Gen8 Intel Pentium G2020T 2.5GHz 712318-001 picture

Genuine HP ProLiant MicroServer Gen8 Intel Pentium G2020T 2.5GHz 712318-001

$199.95



SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount picture

SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount

$202.49



CEOhack 1U X9DRW-3TF+ 4 Bay Server 64GB DDR3 1x E5-2667 V2 3.30GHz 8C 1x 1TB HDD picture

CEOhack 1U X9DRW-3TF+ 4 Bay Server 64GB DDR3 1x E5-2667 V2 3.30GHz 8C 1x 1TB HDD

$119.00



1U 20

1U 20" Short Depth Server Firewall PFSense X11SSH-F Xeon 3.5Ghz 32GB RAM NVME

$247.00



1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports picture

1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports

$149.00