Results 1 to 4 of 4

Thread: ISP refuses to provide support for LINUX

  1. #1
    Junior Member
    Join Date
    Mar 2006
    Posts
    1

    ISP refuses to provide support for LINUX

    Hi

    Appreciate it if somebody could translate the below into linux insturctions for me. i have tried a few things on my own but am getting stuck as kppp requires a username and password which I don't have.


    "Your phone has been setup and the lines for your internet connection have been patched in.

    Please configure your PC as follows,


    Plug the network cable into the socket on the wall by the telephone plug.

    Plug the other end into your network card in the pc and a link light (if fitted) should come on



    Right click on ‘my network places’

    Then click on properties

    Then right click on ‘local area connection’

    Then click on properties

    Highlight ‘internet protocol(TCP/IP)

    And click on properties

    Select use the following IP address



    And add the following IP Address



    IP address: 192.168.0.41

    Subnet mask:255.255.255.0

    Gateway: 192.168.0.253

    DNS1 196.25.255.34

    DNS2 196.25.255.3


    Any problems give us a call


    Dylan"

  2. #2
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441
    See answer #3.
    ---
    Verifying of md5 checksum and burning a CD at slow speed are important.

  3. #3
    Senior Member registered user
    Join Date
    Mar 2004
    Posts
    1,516
    KPPP wont be needed on LAN.
    just go trough netcardconfig and ask again if you have trouble.

  4. #4
    Junior Member
    Join Date
    Mar 2006
    Posts
    2
    at the command line.......
    # /sbin/ifconfig eth0 192.168.0.41 netmask 255.255.255.0 broadcast 192.168.0.255
    that fixes the ip address, now route....

    # /sbin/route add default gw 192.168.0.253

    and now your dns..

    edit /etc/resolv.conf should allready have some ip addresses but should look like this...

    ########
    nameserver 196.25.255.34
    nameserver 196.25.255.3
    ########

    should be able to
    # ping yahoo.com

    if not try to ping your gateway

    # ping 192.168.0.253
    if that works you need to talk to your admin again

    by the way i think those name server addresses are wrong.. you cannot use 255 as an address
    its for broadcast only...
    there are gui's for this but the shell will sometimes tell you more.
    hope it helps.

Similar Threads

  1. Can anyone provide me some info on remastering DVD?
    By dtzxdtzx1 in forum Customising & Remastering
    Replies: 4
    Last Post: 07-20-2007, 03:45 PM
  2. Knoppix 5: Linux kernel does not support PPPoE?
    By wosto in forum Hdd Install / Debian / Apt
    Replies: 0
    Last Post: 04-04-2006, 09:23 AM
  3. Anyone know how to add linux-binary support to FreeSBIE 1.1?
    By your_breakfast in forum Customising & Remastering
    Replies: 0
    Last Post: 02-13-2005, 11:29 AM
  4. Can anyone provide me a floppy-image for V3.6?
    By qeldroma in forum General Support
    Replies: 1
    Last Post: 09-08-2004, 01:34 PM
  5. Can anyone provide me a floppy-image for V3.6?
    By qeldroma in forum Laptops
    Replies: 0
    Last Post: 09-07-2004, 10:52 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


DELL PowerEdge R430 8SFF 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45 picture

DELL PowerEdge R430 8SFF 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45

$226.00



Dell PowerEdge R630 Server 2x E5-2680 V4 = 28 Cores S130 32GB RAM NEW 480GB SSD picture

Dell PowerEdge R630 Server 2x E5-2680 V4 = 28 Cores S130 32GB RAM NEW 480GB SSD

$197.99



1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 240GB SSD 2x 10GBE picture

1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 240GB SSD 2x 10GBE

$259.00



Cisco UCS C240 M4 2U Server w/ 2x E5-2680v4, NO RAM picture

Cisco UCS C240 M4 2U Server w/ 2x E5-2680v4, NO RAM

$49.99



Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays picture

Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays

$159.99



Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330 picture

Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330

$182.65



Lenovo ThinkServer TS140 Xeon E3-1225v3 3.20GHz 16GB RAM Tower Server Needs HDD picture

Lenovo ThinkServer TS140 Xeon E3-1225v3 3.20GHz 16GB RAM Tower Server Needs HDD

$99.99



Dell PowerEdge R620 Server 2x E5-2660 v2 2.2GHz 20 Cores 256GB RAM 1x 480GB SSD picture

Dell PowerEdge R620 Server 2x E5-2660 v2 2.2GHz 20 Cores 256GB RAM 1x 480GB SSD

$139.99



Dell Poweredge R730xd LFF 14-Bay 2U Server | Choose Your CPU & RAM Config picture

Dell Poweredge R730xd LFF 14-Bay 2U Server | Choose Your CPU & RAM Config

$489.99



Gigabyte 2U Server 2x E5-2698 v3  128gb  12x 3.5 12G  9362-8i  14x Trays  Rails picture

Gigabyte 2U Server 2x E5-2698 v3 128gb 12x 3.5 12G 9362-8i 14x Trays Rails

$394.99