-
Junior Member
registered user
QTParted Problem
Normally i use QTParted to format Hard Drives in my computer. Today i recieved a second hard drive which i am going to use for back-ups and started up QTParted to do the format (After first creating a partition in FDISK) and neither of my Western Digital drives were found by QTParted.
I could format the partition in Windows but it demands i do it NTFS but i want it to be FAT32.
Any ideas?
-
Senior Member
registered user
QTParted Problem
Specifics please. What type of controller is it attached to and what, if any, are your boot messages concerning this drive?
And why would you use fdisk (windoze version?) to partition this drive before starting QTparted? After all, QTparted _is_ a partition editor.
-
Junior Member
registered user
Re: QTParted Problem
Originally Posted by
nad
Specifics please. What type of controller is it attached to and what, if any, are your boot messages concerning this drive?
And why would you use fdisk (windoze version?) to partition this drive before starting QTparted? After all, QTparted _is_ a partition editor.
Indeed it is but as QTParted would not see my drives i tried to use FDISK forgetting that FDISK would not format the partition as well (QTParted has spoiled me).
Drive one is connected to IDE1 as the master
Drive two is connected to IDE1 as the slave
On boot both drives are found, they are also both found in WinXP and knoppix itself.
EDIT: I have also noticed that QTParted wont show the Hard Drives in my other computer.
-
Senior Member
registered user
QTParted Problem
Please post the relevent lines from your message log and double check the drive jumpers and cabling.
"On boot both drives are found, they are also both found in WinXP and knoppix itself. I have also noticed that QTParted wont show the Hard Drives in my other computer."
?
It would help if you would explain your exact actions.
-
Junior Member
registered user
Re: QTParted Problem
Originally Posted by
nad
Please post the relevent lines from your message log and double check the drive jumpers and cabling.
"On boot both drives are found, they are also both found in WinXP and knoppix itself. I have also noticed that QTParted wont show the Hard Drives in my other computer."
?
It would help if you would explain your exact actions.
Cables and jumpers are correct.
In Windows XP the drives are seen a C: and F:
In Knoppix they are seen as hda and hdb
In FDISK the drives are seen as 1 and 2
The POST lists both hard drives with the correct model numbers (as does windows xp which is currently running from the C drive as i type this)
SuSE 9.2 Live CD's partitioning tool found both drives as hda and hdb (for some reason it thought hdb has a FAT32 file system on it, must be cause i made the partition in FDISK)
When i open QTParted in Knoppix by going to Konsole and typing "qtparted" i just get the normal message about hdc being read-only and then when the main QTParted window opens it only lists hdc despite the fact that hda and hdb are shown on the Knoppix desktop (hdb is unmountable as it doesnt have a filesystem)
-
Senior Member
registered user
QTParted Problem
At a command console, type the command: parted /dev/hda print
You may also try this for /dev/hdb .
By the way, you do know that you have to be root in order to modify the partition tables?
-
Junior Member
registered user
Re: QTParted Problem
Originally Posted by
nad
By the way, you do know that you have to be root in order to modify the partition tables?
Opps, and after using QTParted to format hard drives many times i go and forget the basics.
Thanks, thats sorted it.
Similar Threads
-
By cvcc12000 in forum Hardware & Booting
Replies: 4
Last Post: 08-17-2006, 09:42 PM
-
By spliknik in forum General Support
Replies: 6
Last Post: 03-28-2006, 11:17 PM
-
By Newbie-100 in forum Hdd Install / Debian / Apt
Replies: 5
Last Post: 08-11-2005, 10:57 PM
-
By Kowood in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 01-31-2005, 09:20 AM
-
By sminotti in forum Hdd Install / Debian / Apt
Replies: 4
Last Post: 07-23-2003, 01:49 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Juniper EX4300-24T Layer 3 24 Ports Manageable Ethernet Switch 1 Year Warranty
$139.00
Juniper EX3300-48T-BF 48 Port 4 X Expansion Slots Layer 3 Switch 1 Year Warranty
$235.00
Juniper Networks EX3300-48P 48-Port PoE+ 4x SFP+ Network Switch w/ Power Cord
$43.95
JUNIPER EX3400-48P 48x 1GB PoE+ RJ-45 4x 10GB SFP+ 2x 40GB QSFP+, DUAL AC POWER
$210.00
Juniper EX3300-48P, 48 Port PoE+ Gigabit Network Switch w/ Power cord
$54.99
Juniper Networks EX2300-24P 24 Port Gigabit PoE 4 SFP 1/10G Network Switch
$115.00
EX2300-24P Juniper 24-port 10/100/1000BASE-T PoE+ 4 x 1/10GbE SFP/SFP+ UNCLAIMED
$450.00
Juniper Networks EX3400-48P 48x Gigabit PoE+ RJ45 2x 40Gb/s QSFP+ Switch
$166.24
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$41.28
Juniper EX2300-48P PoE+ Switch 48x 1GbE & 4 SFP+/SFP 10G uplinks, Tested
$289.00