Results 1 to 4 of 4

Thread: Load Knoppix to USB Memory Card?

  1. #1
    Junior Member registered user
    Join Date
    Feb 2004
    Location
    UK - Midlands
    Posts
    11

    Load Knoppix to USB Memory Card?

    Having recently found an 8Gb USB memory card available for <£85, I was wondering on the possibilities of loading Knoppix to such a device in a mobile "boot-and-use" configuration (who needs a computer, use any handy one available ...). Has anyone tried this? Does the knoppix-installer accept a USB stick rather than a conventional HD - obviously the install will still need the full hardware search/ID from the CD/DVD. I haven't found anything on this in the forums, so far; if there is a topic, please point me ...

    Cheers!

  2. #2
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441
    I have not had any sucess with booting from these USB devices. While I don't have one large enough for Knoppix, I have tried the Knoppix based DSL (Damn Small Linux) on a UBS flash drive. The new version of DSL has an installer for flash drives that makes the whole process of building the flash drive very clean and examining the drive I can see that it seems to be well structured and bootable. But my notebook (an HP 4240) refuses to boot it. It does have a BIOS option that lets me boot from external USB devices first, but it just doesn't seem to see the drive. I had a chance to try the same drive on a friend's IBM notebook this weekend. After a few flase starts reconfiguring the BIOS we finally saw the initial screen, but during the boot process the computer seemed to move around drives and suddenly could not find the USB drive any longer. It dropped us to that "very limited shell". Never got it working beyond that.

    So my advice would be before buying this device with the hope of getting Knoppix to run on it, let DSL install itself to a smaller flash device and see if your system can run from it. If not I wouldn't waste the time and money on the larger device. If DSL does work then you at least have a shot at getting Knoppix working. But I don't expect the Knoppix installer will make this clean for you (heck, it seems to never get things like networking right even when used with a normal target drive). Bt you'll at least know if it can work or not for your hardware.
    ---
    Verifying of md5 checksum and burning a CD at slow speed are important.

  3. #3
    Senior Member registered user
    Join Date
    Jan 2006
    Location
    California, USA
    Posts
    122
    Here is a non-knoppix derived version of linux, I have only tried it out via livecd, but here is the section of its website descrbing as usb thumb drive install:
    http://www.goosee.com/puppy/flash-puppy.htm

  4. #4
    Junior Member registered user
    Join Date
    Feb 2004
    Location
    UK - Midlands
    Posts
    11
    Fine! Flash-puppy looks interesting, Knoppix may be a pain. Still worth investigating. I'm aiming for the 8Gb USB card anyway, at that price it's a bargain. I already extensively use a 512Mb card for backup/transfer between several machines, one of which is an elderly Toshiba laptop whose CD/DVD drive just died. With an increasing amount of AVI/JPG files to shift around, the 8Gb will be a well-used capacity. I may try some experiments in loading Knoppix first, and if it doesn't work, c'est la vie - I still have considerable use for the card. Keep you posted - I'm off to a LUG.

Similar Threads

  1. problem with PCMCIA memory card
    By maavalko in forum Laptops
    Replies: 0
    Last Post: 03-05-2008, 04:33 PM
  2. Knoppix 5.0.1 doesn't load module for Adaptec aha1542CP card
    By mailinator in forum Hardware & Booting
    Replies: 0
    Last Post: 11-21-2006, 11:29 PM
  3. knoppix will load, but after system starts, GUI wont load.
    By n()()dle in forum General Support
    Replies: 4
    Last Post: 12-23-2004, 01:39 AM
  4. Yet Another USB Memory Card Reader Thread
    By funkyrat in forum Hdd Install / Debian / Apt
    Replies: 2
    Last Post: 02-22-2004, 12:53 AM
  5. Bootable SMB/LDAP server with USB memory card
    By cgmckeever in forum Customising & Remastering
    Replies: 0
    Last Post: 12-03-2003, 06:46 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


SGIN 17.3

SGIN 17.3" Laptop 8GB RAM 512GB SSD Notebook with IPS Full HD 2.8GHz Windows 11

$269.00



A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G picture

A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G

$13.99



Team T-FORCE VULCAN Z 16GB (2 x 8GB) 288-Pin PC RAM DDR4 3200 (PC4 25600) XMP picture

Team T-FORCE VULCAN Z 16GB (2 x 8GB) 288-Pin PC RAM DDR4 3200 (PC4 25600) XMP

$35.99



HyperX FURY DDR3 8GB 16GB 32GB 1600 MHz PC3-12800 Desktop RAM Memory DIMM 240pin picture

HyperX FURY DDR3 8GB 16GB 32GB 1600 MHz PC3-12800 Desktop RAM Memory DIMM 240pin

$12.90



Crucial 16GB (2x 8GB) Kit DDR3L 1600MHz PC3-12800 UDIMM Desktop 240-Pin CL11 RAM picture

Crucial 16GB (2x 8GB) Kit DDR3L 1600MHz PC3-12800 UDIMM Desktop 240-Pin CL11 RAM

$23.33



Crucial DDR3L 16GB 1600 2x 8GB PC3-12800 Laptop SODIMM Memory RAM PC3 16G DDR3 picture

Crucial DDR3L 16GB 1600 2x 8GB PC3-12800 Laptop SODIMM Memory RAM PC3 16G DDR3

$21.50



Samsung  8 GB PC4-17000 DDR4-2133 1Rx8 DDR4 Desktop Memory HP P/N  798034-001 picture

Samsung 8 GB PC4-17000 DDR4-2133 1Rx8 DDR4 Desktop Memory HP P/N 798034-001

$10.00



G.Skill RipJaws V 16GB (2x8GB) PC4-28800 (DDR4-3600) Memory F4-3600C16D-16GVKC picture

G.Skill RipJaws V 16GB (2x8GB) PC4-28800 (DDR4-3600) Memory F4-3600C16D-16GVKC

$23.50



HyperX FURY DDR4 16GB 32GB 64GB 2666MHz PC4-21300 Desktop RAM Memory DIMM 288Pin picture

HyperX FURY DDR4 16GB 32GB 64GB 2666MHz PC4-21300 Desktop RAM Memory DIMM 288Pin

$119.80



A-Tech 64GB Kit 2x 32GB PC4-25600 Laptop SODIMM DDR4 3200 MHz 260-Pin Memory RAM picture

A-Tech 64GB Kit 2x 32GB PC4-25600 Laptop SODIMM DDR4 3200 MHz 260-Pin Memory RAM

$123.99