-
Getting a "static" screen after boot
I am confused as to why this happening. I have booted knoppix with all good results from other computers, for some reason mine (which is much higher end than the others i booted it from) will not work properly.
I insert the disk, press enter to boot, it does its thing where it recognizes my hardware, "audit", etc.
Then one of two things happen
one- the screen just goes black, there is activity in the CDROM though.
Two - there is a band of 'static' in the middle of the screen. My monitor is 17", I would say the band is about 3.5" wide horizontal in the screen. It looks like the KDE blue on the edges, and the "LINUX IN USE" background black in the middle. I am not sure why there is a graphical problem. Any ideas?
I am running...
480W power supply
MSI Neo motherboad
400mhz 512MD DDR RAm
Maxtor 40GB hard drive.
ATI radeon 9200SE
I have had Fedora run on this system no problem.
-
Static Screen, too
Weill, I'm waiting for a reply. I have the same problem. I've tried everthing I could find on this PC and nothing works. I have a PC that was built by someone. No specs available. Video is built into the motherboard. They lost their OS "windows" because of a MBR virus. SO, I'm trying to rescue their files and do a rebuild. I insert knoppix -- just got the cd's so they have to be new -- and tried numerous commands on the cheat sheet and I have the Knoppix hacker book from Orielly.
knoppix noagp noaudio noapm noapic acpi=off nodma nopcmcia noscsi nousb
for the video portion I've tried vga=0 OR vga=0 3 -- then init 5 -- I've tried "scan" and then all the video numbers 0 thru 9 one at a time. I don't know where to go. I've searched this site and tried all I could find. Must be a common problem because 28 people have viewed this message and no answers.
Liz M
-
liz
had the same problem and found the answer here a few weeks ago
i also have integrated video on m-board
at boot type
knoppix vga=0 3
then at prompt type
modprobe intel_agp
return
init 5
that should do it
once that is fixed maybe we can figure out together how to make a persistent image on the hard drive that retains the fix and doesn't revert to garbage screen!
thanks
Similar Threads
-
By blizzardscout2 in forum Hdd Install / Debian / Apt
Replies: 3
Last Post: 01-24-2008, 03:23 AM
-
By ix86i in forum Customising & Remastering
Replies: 1
Last Post: 11-03-2004, 04:16 AM
-
By oreo in forum General Support
Replies: 11
Last Post: 07-23-2003, 06:33 PM
-
By geebee2000 in forum Hardware & Booting
Replies: 9
Last Post: 05-21-2003, 07:29 PM
-
By Juny in forum General Support
Replies: 4
Last Post: 03-14-2003, 09:02 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
G5T03 Dell Intel DC S3700 Series 800GB SATA 6Gb/s 2.5" SSD 0G5T03 SSDSC2BA800G3E
$55.00
Brand New 128GB-240GB-256GB-512GB 2.5 inch SATA3 Solid State Drive 2.5" SSD
$17.99
HPGYT DELL 960GB SATA 6Gb/s 2.5in Internal SSD 0HPGYT MTFDDAK960TCB
$59.00
Samsung PM991 1TB M.2 SSD Internal PCIe 3.0x4 2230 NVMe R31264 Solid State Drive
$95.00
Patriot P210 128GB 256GB 512GB 1TB 2TB 2.5" SATA 3 6GB/s Internal SSD PC/MAC Lot
$14.99
Netac 1TB 2TB 512GB Internal SSD 2.5'' SATA III 6Gb/s Solid State Drive lot
$13.99
Micron 2300 256GB M.2 GEN 3x4 PCIe NVMe Solid State Drive 2280 SSD 00C2G4
$14.99
Fanxiang 4TB 2TB 1TB SSD 550MB/s 2.5'' SATA III Internal Solid State Drive lot
$13.99
Lot of 10 Mixed Brand Model 128GB 2.5" SATA SSD Solid State Drives
$69.99
Fanxiang SSD 512GB 1TB 2TB 4TB 2.5'' SSD SATA III Internal Solid State Drive lot
$107.99