Results 1 to 7 of 7

Thread: stops when searching for usb....

  1. #1
    Junior Member
    Join Date
    Apr 2006
    Posts
    4

    stops when searching for usb....

    when i boot knoppix from my cd and hit enter on the first thing that comes up, here's what happens:
    the screen goes black and the little penguin shows up in the upper left
    it welcomes me

    then it says something about "searching for usb..."
    and nothing else comes up
    did it just stop there or is it just running slowly? i dont understand plz help
    thnx

  2. #2
    Junior Member
    Join Date
    Apr 2006
    Posts
    4
    come on please help me with this

  3. #3
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441
    Quote Originally Posted by rahrah
    come on please help me with this
    Wow, you waited 52 minutes before posings "come on..."! Not only is that ignorant to the people who might respond to you but were not reading the forum at the exact time that you posted, but it actually lowers your chance of getting a response.

    When you are at the Knoppix Forum Index, there are four "links" near the top right hand side of the page. These are Mark All Forums Read, View Posts Since Last Visit, View Your Posts and View Unanswered Posts. This last one allows people to scan all of the forums, find questions that have been posted but no one has reponded to yet, and see if we might be able to help. I know that several of us do use this feature occasionally to try to make sure that people are getting fedback.

    When you respond to your own post as you have done, the "replies count" is no longer zero and this feature does not find such posts. You actually reduce your chance of getting useful feedback by your effort to call extra attention to yourself.
    ---
    Verifying of md5 checksum and burning a CD at slow speed are important.

  4. #4
    Junior Member
    Join Date
    Apr 2006
    Posts
    4
    sorry i wasnt aware of that feature; wont happen again

  5. #5
    Junior Member
    Join Date
    Jan 2006
    Posts
    4

    Is there an answer?

    I am experiencing a similiar problem. I have had 4.0.2 DVD installed on this system before without this issue. I have had to replace the HD when Knoppix was installed and now I am getting this error.

  6. #6
    Junior Member
    Join Date
    Apr 2006
    Posts
    4

    yes there is

    when the first knoppix menu comes up you have to use one of the knoppix "cheatcodes"
    simply type in
    knoppix nousb
    and it will skip the usb check

  7. #7
    Senior Member registered user
    Join Date
    Jun 2005
    Posts
    348
    Lugh:

    The key word here is "INSTALLED". Knoppix is not meant to be installed onto a hard drive in it's current version. Things stop working, as you have encountered. Try installing Debian or another distro that is intended for hard drive installation. It will give you much less greif in the long run. That may change in the next version or future updates to Knoppix, but 4.0.2 and prior have issues with HDD install. Search the "HDD Install/Debian/Apt" section of the forum. I'm sure you will find some good information there.

Similar Threads

  1. searching '386 or 32 bit ISO image
    By 77yrold in forum General Support
    Replies: 3
    Last Post: 09-30-2009, 10:49 PM
  2. searching klik ?
    By cintra in forum Klik
    Replies: 7
    Last Post: 05-09-2006, 02:20 PM
  3. Searching for boot record from CD/DVD
    By Noiseboy in forum Hardware & Booting
    Replies: 4
    Last Post: 05-14-2005, 07:41 PM
  4. Searching man pages
    By sn0wflake in forum General Support
    Replies: 4
    Last Post: 03-25-2004, 07:08 AM
  5. Been searching for ages
    By deadsoul in forum General Support
    Replies: 7
    Last Post: 12-10-2003, 12:23 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping* picture

NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*

$18.00



New Cisco SFP-25G-SR-S 25G SFP28 25GBASE-SR 850nm 300m LC MMF Transceiver Module picture

New Cisco SFP-25G-SR-S 25G SFP28 25GBASE-SR 850nm 300m LC MMF Transceiver Module

$51.30



LOT OF 10 455883-B21 HP 10Gb SR SFP Transceiver 455885-001 456096-001 picture

LOT OF 10 455883-B21 HP 10Gb SR SFP Transceiver 455885-001 456096-001

$59.99



Cisco Nexus 48-Port 10G SFP+ Switch N9K-93128TX w/ 9K-M12PQ 12-Port 40G QSFP picture

Cisco Nexus 48-Port 10G SFP+ Switch N9K-93128TX w/ 9K-M12PQ 12-Port 40G QSFP

$112.49



GENUINE Cisco SFP-10G-SR V03 SFP+ GBIC Transceiver Module 10-2415-03 picture

GENUINE Cisco SFP-10G-SR V03 SFP+ GBIC Transceiver Module 10-2415-03

$6.80



🔥🔥🔥 CISCO SFP-10G-SR V03 10-2415-03 850nm 10GBASE-SR SFP+ Multi Module 🔥🔥🔥 picture

🔥🔥🔥 CISCO SFP-10G-SR V03 10-2415-03 850nm 10GBASE-SR SFP+ Multi Module 🔥🔥🔥

$6.80



For Cisco SFP-10G-T, Ubiquiti UF-RJ45-10G Transceiver, SFP+ to RJ45 10GBase-T picture

For Cisco SFP-10G-T, Ubiquiti UF-RJ45-10G Transceiver, SFP+ to RJ45 10GBase-T

$45.99



NEW FS SFP-10G-T 10GBASE T SFP+ 30M Transceiver Module (Lot of 1 Unit) picture

NEW FS SFP-10G-T 10GBASE T SFP+ 30M Transceiver Module (Lot of 1 Unit)

$39.95



New Cisco GLC-TE 1G SFP Copper RJ45 100m 1000BASE-T Transceiver Module picture

New Cisco GLC-TE 1G SFP Copper RJ45 100m 1000BASE-T Transceiver Module

$22.32



Cisco SFP-25G-SR-S 25GBASE-SR SFP28 850nm 100m MMF LC Transceiver Module W/Holo picture

Cisco SFP-25G-SR-S 25GBASE-SR SFP28 850nm 100m MMF LC Transceiver Module W/Holo

$219.00