Results 1 to 2 of 2

Thread: Stepmania on Knoppix 5.01 DVD (CONFIG_X86_CMPXCHG in kernel)

  1. #1
    Junior Member
    Join Date
    Jun 2006
    Posts
    2

    Stepmania on Knoppix 5.01 DVD (CONFIG_X86_CMPXCHG in kernel)

    Okay... Okay... Okay.... I'm forced to make an account.

    I figured out where to get the drivers I need to enable "Direct Rendering"....but..... everytime I try to install them(dripkg), the makefiles complain that CONFIG_X86_CMPXCHG is not enabled in the kernel.

    How do I patch/upgrade my kernel to enable CONFIG_X86_CMPXCHG???

    I tried this --> http://www.ussg.iu.edu/hypermail/lin...10.3/1505.html

    Even after changing all "linux-2.6" to "linux-2.6.17" that Knoppix 5.01 DVD comes with..... doing...

    cd /usr/src
    patch -p0 < MyCutAndPasteFromURLKernelPatch.txt

    I get a bunch of malformed errors. Now, I don't think that patch is correct and I don't wanna mess up my knoppix install(though, it's pretty standard... so I could just wipe it out and start over I guess). I've read a bunch of tutorials online about patching/upgrading kernels, but I'm thinking Knoppix's kernel is too customized for me to download a generic kernel and just install it. Also, I question if I even need to upgrade/patch the kernel... because make menuconfig --> search... shows me that there are CONFIG_X86_CMPXCHG & CONFIG_X86_CMPXCHG64 already present...somewhere, in some file...marked as "=n". How do I change them to "=y"?
    At the end of the day, I want glxinfo to tell me "Direct rendering: Yes". And I'm sure I'll get that once I get this dripkg makefile to complete successfully. I already suspect that my patching attempts have made a bunch of unfinished changes that'll end up forcing me to re-install knoppix from scratch before this is all over.

    BTW, This is a Toshiba Satellite A105-S4004 notebook.
    The command "dmesg | grep agp" shows Intel 945GM Chipset.

    Thanks,

    UPDATE:

    I see Intel 945GM graphics driver for Linux here:
    http://downloadfinder.intel.com/scri...9&submit=Go%21

    I see DRI's home page listing Intel's i945GM compatibility as "supported" here:
    http://dri.freedesktop.org/wiki/Inte...HardwareVendor

    ....but, still haven't figured out what to do with all this....

  2. #2
    Junior Member
    Join Date
    Jun 2006
    Posts
    2
    SOLVED!!!

    1) Using the fresh install of Knoppix 5.01,
    2) edit /etc/X11/xorg.conf to use i810 driver
    3)install the following enabled Direct Rendering. (glxinfo | grep render)

    mesa-common-dev (= 6.5.0.cvs.20060524-1)
    libgl1-mesa-glx (= 6.5.0.cvs.20060524-1)
    libgl1-mesa-dri (= 6.5.0.cvs.20060524-1)
    libgl1-mesa-dev (6.5.0.cvs.20060524-1)

    EDIT#1: Turns out this brakes XMMS with BadMatch Invalid Parameter.... but whatever, there are other Media players for linux that work fine.
    EDIT#2 In terminal type "export XLIB_SKIP_ARGB_VISUALS=1" then type "xmms" and it'll start up. Same thing for Audacity.
    EDIT#3 add this to the bottom of /etc/profile and you won't have to type it everytime you need it.

Similar Threads

  1. Trouble with knoppix-kernel.patch <-> any Kernel
    By -Hawkeye- in forum Customising & Remastering
    Replies: 1
    Last Post: 12-07-2005, 11:50 AM
  2. knoppix 3.8.1 (kernel 2.6.11):new custom kernel without ub ?
    By theh in forum Hdd Install / Debian / Apt
    Replies: 5
    Last Post: 10-31-2005, 11:03 AM
  3. How do I install kernel source and config/compile kernel??
    By cfish in forum Hdd Install / Debian / Apt
    Replies: 0
    Last Post: 04-25-2005, 07:31 AM
  4. Kernel compile problem - first Knoppix kernel compile
    By Nigel_Tufnel in forum Hdd Install / Debian / Apt
    Replies: 2
    Last Post: 10-20-2003, 01:09 PM
  5. Modified kernel results in Kernel Panic - No init found.
    By tji in forum Customising & Remastering
    Replies: 4
    Last Post: 06-12-2003, 06:40 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


DELL PowerEdge R430 8SFF 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45 picture

DELL PowerEdge R430 8SFF 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45

$226.00



Dell PowerEdge R630 Server 2x E5-2680 V4 = 28 Cores S130 32GB RAM NEW 480GB SSD picture

Dell PowerEdge R630 Server 2x E5-2680 V4 = 28 Cores S130 32GB RAM NEW 480GB SSD

$197.99



Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays picture

Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays

$159.99



Cisco UCS C240 M4 2U Server w/ 2x E5-2680v4, NO RAM picture

Cisco UCS C240 M4 2U Server w/ 2x E5-2680v4, NO RAM

$49.99



Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330 picture

Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330

$182.65



Lenovo ThinkServer TS140 Xeon E3-1225v3 3.20GHz 16GB RAM Tower Server Needs HDD picture

Lenovo ThinkServer TS140 Xeon E3-1225v3 3.20GHz 16GB RAM Tower Server Needs HDD

$99.99



Dell PowerEdge R730 16-Bay 2.5” 2xE5-2695 v3 2.3Ghz 64GB iDRAC8 Ent H730 2x750W picture

Dell PowerEdge R730 16-Bay 2.5” 2xE5-2695 v3 2.3Ghz 64GB iDRAC8 Ent H730 2x750W

$250.00



Dell PowerEdge R720xd 26HDD 300gb  2.5-inch E5-2697  X 2CPU 384RAM 7.2 Tb HDD  picture

Dell PowerEdge R720xd 26HDD 300gb 2.5-inch E5-2697 X 2CPU 384RAM 7.2 Tb HDD 

$180.00



Dell Poweredge R730xd LFF 14-Bay 2U Server | Choose Your CPU & RAM Config picture

Dell Poweredge R730xd LFF 14-Bay 2U Server | Choose Your CPU & RAM Config

$489.99



1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 240GB SSD 2x 10GBE picture

1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 240GB SSD 2x 10GBE

$259.00