Results 1 to 2 of 2

Thread: Stepmania on Knoppix 5.01 DVD (CONFIG_X86_CMPXCHG in kernel)

  1. #1
    Junior Member
    Join Date
    Jun 2006
    Posts
    2

    Stepmania on Knoppix 5.01 DVD (CONFIG_X86_CMPXCHG in kernel)

    Okay... Okay... Okay.... I'm forced to make an account.

    I figured out where to get the drivers I need to enable "Direct Rendering"....but..... everytime I try to install them(dripkg), the makefiles complain that CONFIG_X86_CMPXCHG is not enabled in the kernel.

    How do I patch/upgrade my kernel to enable CONFIG_X86_CMPXCHG???

    I tried this --> http://www.ussg.iu.edu/hypermail/lin...10.3/1505.html

    Even after changing all "linux-2.6" to "linux-2.6.17" that Knoppix 5.01 DVD comes with..... doing...

    cd /usr/src
    patch -p0 < MyCutAndPasteFromURLKernelPatch.txt

    I get a bunch of malformed errors. Now, I don't think that patch is correct and I don't wanna mess up my knoppix install(though, it's pretty standard... so I could just wipe it out and start over I guess). I've read a bunch of tutorials online about patching/upgrading kernels, but I'm thinking Knoppix's kernel is too customized for me to download a generic kernel and just install it. Also, I question if I even need to upgrade/patch the kernel... because make menuconfig --> search... shows me that there are CONFIG_X86_CMPXCHG & CONFIG_X86_CMPXCHG64 already present...somewhere, in some file...marked as "=n". How do I change them to "=y"?
    At the end of the day, I want glxinfo to tell me "Direct rendering: Yes". And I'm sure I'll get that once I get this dripkg makefile to complete successfully. I already suspect that my patching attempts have made a bunch of unfinished changes that'll end up forcing me to re-install knoppix from scratch before this is all over.

    BTW, This is a Toshiba Satellite A105-S4004 notebook.
    The command "dmesg | grep agp" shows Intel 945GM Chipset.

    Thanks,

    UPDATE:

    I see Intel 945GM graphics driver for Linux here:
    http://downloadfinder.intel.com/scri...9&submit=Go%21

    I see DRI's home page listing Intel's i945GM compatibility as "supported" here:
    http://dri.freedesktop.org/wiki/Inte...HardwareVendor

    ....but, still haven't figured out what to do with all this....

  2. #2
    Junior Member
    Join Date
    Jun 2006
    Posts
    2
    SOLVED!!!

    1) Using the fresh install of Knoppix 5.01,
    2) edit /etc/X11/xorg.conf to use i810 driver
    3)install the following enabled Direct Rendering. (glxinfo | grep render)

    mesa-common-dev (= 6.5.0.cvs.20060524-1)
    libgl1-mesa-glx (= 6.5.0.cvs.20060524-1)
    libgl1-mesa-dri (= 6.5.0.cvs.20060524-1)
    libgl1-mesa-dev (6.5.0.cvs.20060524-1)

    EDIT#1: Turns out this brakes XMMS with BadMatch Invalid Parameter.... but whatever, there are other Media players for linux that work fine.
    EDIT#2 In terminal type "export XLIB_SKIP_ARGB_VISUALS=1" then type "xmms" and it'll start up. Same thing for Audacity.
    EDIT#3 add this to the bottom of /etc/profile and you won't have to type it everytime you need it.

Similar Threads

  1. Trouble with knoppix-kernel.patch <-> any Kernel
    By -Hawkeye- in forum Customising & Remastering
    Replies: 1
    Last Post: 12-07-2005, 11:50 AM
  2. knoppix 3.8.1 (kernel 2.6.11):new custom kernel without ub ?
    By theh in forum Hdd Install / Debian / Apt
    Replies: 5
    Last Post: 10-31-2005, 11:03 AM
  3. How do I install kernel source and config/compile kernel??
    By cfish in forum Hdd Install / Debian / Apt
    Replies: 0
    Last Post: 04-25-2005, 07:31 AM
  4. Kernel compile problem - first Knoppix kernel compile
    By Nigel_Tufnel in forum Hdd Install / Debian / Apt
    Replies: 2
    Last Post: 10-20-2003, 01:09 PM
  5. Modified kernel results in Kernel Panic - No init found.
    By tji in forum Customising & Remastering
    Replies: 4
    Last Post: 06-12-2003, 06:40 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


DELL PowerEdge R730XD Server 2x E5-2690v4 2.6GHz =28 Cores 64GB H730 4xRJ45 picture

DELL PowerEdge R730XD Server 2x E5-2690v4 2.6GHz =28 Cores 64GB H730 4xRJ45

$387.00



1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE picture

1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE

$273.00



Dell PowerEdge T420 2x Xeon E5-2430 V2 2.50GHZ 32GB DDR3-1600MHZ 2x 550W PSU picture

Dell PowerEdge T420 2x Xeon E5-2430 V2 2.50GHZ 32GB DDR3-1600MHZ 2x 550W PSU

$149.95



DELL PowerEdge R730 Server 2x E5-2697v4 2.3GHz =36 Cores 128GB H730 4xRJ45 picture

DELL PowerEdge R730 Server 2x E5-2697v4 2.3GHz =36 Cores 128GB H730 4xRJ45

$461.00



Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330 picture

Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330

$182.65



Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD picture

Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD

$389.99



DELL R630 SERVER 8 x 2.5'' 2X E5-2680V4 32GB RAM IDRAC ENT & NDC 2X 495W PSU picture

DELL R630 SERVER 8 x 2.5'' 2X E5-2680V4 32GB RAM IDRAC ENT & NDC 2X 495W PSU

$169.95



Cisco UCS C220 M4 1x Xeon E5-2667 V4 3.20GHZ 128GB DDR4-2400MHZ 2x 770W AC PSU picture

Cisco UCS C220 M4 1x Xeon E5-2667 V4 3.20GHZ 128GB DDR4-2400MHZ 2x 770W AC PSU

$129.99



Dell PowerEdge R730 2x E5-2699V3 2.3Ghz 36 Core 128GB RAM H730 X520-I350 2x750W picture

Dell PowerEdge R730 2x E5-2699V3 2.3Ghz 36 Core 128GB RAM H730 X520-I350 2x750W

$299.99



Cisco UCS C220 M3 1U 2x 6-Core Xeon E5-2620 2.0GHz / 64GB RAM / No HDD picture

Cisco UCS C220 M3 1U 2x 6-Core Xeon E5-2620 2.0GHz / 64GB RAM / No HDD

$89.99