They will be fine. KNOPPIX mounts and reads any windows file system. If you copy the files to CD, they will be intact and in an ISO 9660 (CD) format.
A friend's system crashed and we are going to reinstall Windows but before we do we want to backup some data files. I booted up into Knoppix 5.0.1 and was able to find the Windows folders using Konqueror. Now that I found the files I am going to try to copy them to a CD. What format will these files be in? Once I reinstall Windows, will I just be able to copy the files over straight from the CD?
They will be fine. KNOPPIX mounts and reads any windows file system. If you copy the files to CD, they will be intact and in an ISO 9660 (CD) format.
the files may not copy well to a CD. See my response at the end of the next topic. The files need to be massaged into the format for a CD and burned onto the CD. A USB hard drive or a network hookup to a computer with FAT32 drive is what I usually use.
Use k3b to burn the files to cd. It should read just fine in any late windows machine. Unless you change them, the files should be in their original formats.
OWC Guardian Maximus Raid Enclosure SATA Hard Drive FireWire
$36.99
Dell EMC 092GD6 Broadcom 9305-16i LSI Quad Port 4 Port SAS RAID Controller
$84.99
Yottamaster 2 Bay RAID Hard Drive Enclosure USB 3.1 For 2.5" SATA HDD SSD UASP
$56.25
Yottamaster 5 Bay RAID Hard Drive Enclosure Type-C B For 2.5" 3.5" SATA HDD SSDs
$131.59
Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 4Y5H1 High Profile
$17.99
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
LSI 8 Port 6Gbps PCIe 3.0 External SAS RAID Card w/ 1GB CacheVault & Low Profile
$29.00
RAID Controller Dell HYM6Y PERC H750 8GB NV Low Profile RAID Controller Card -
$26.88
UCSC-RAID-M5 CISCO 12Gb/s SAS HBA Raid Controller w/Battery & Cable
$69.99
Yottamaster 2 Bay RAID Hard Drive Enclosure USB 3.1 Type B For 3.5" SATA HDDs
$69.91