Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17

Thread: Need some help on removing a Bagle worm from windows

  1. #11
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441
    Certainly seems like a case where rescuing the data with Knoppix while you still can and reformatting and starting over is a better choice than trying to "fix" the data. That's a common situation with NTFS. Less common with FAT, but then again I don't know your friend's or your skills or what all bad has happened to the disk. And it certainly could be a drive going bad as weel (in addition to the infection, not instead of). I have a few drives here that I could format and make look perfect, but in less than a month you would not be able to accurately read the files from them again (and even Spinrite can't help them).

    My suggestion: recover all that your friend wants to save (see the resque fac for tips if needed). Repartition and reformat the drive, if it's woth saving at all, but either don't use it for critical data or make very sure that you or he have good backups. Decide in a few months if the drive is still stable and safe enough to depend on, if not erase it throughly and destroy it.

  2. #12
    Junior Member
    Join Date
    Jun 2006
    Posts
    9
    It's a laptop and he apparently has none of the drivers so reformat could become a bit tricky, right?

  3. #13
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441
    Quote Originally Posted by rwhboston
    It's a laptop and he apparently has none of the drivers so reformat could become a bit tricky, right?
    I don't see why. Vitrtually any even halfway modern laptop's hard drive should bo on an IDE interface and look like any other IDE drive to formatting and partitioning software, no extra drivers needed beyond what is in Windows or even what is in DOS.
    ---
    Verifying of md5 checksum and burning a CD at slow speed are important.

  4. #14
    Junior Member
    Join Date
    Jun 2006
    Posts
    9
    Alright then I think I'll give it a shot and see what happens, since this will be a first for me is there any tips or matters of importance I should know before going through with this.

  5. #15
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441
    Without knowing you or your abilities there is not much advice I can give. Backup everything that you need before you start. Have one or more bootable DOS diskettes available, I would start with DOS and your partitioning software of choice. Consier that it is likely that the disk is headed to it's grave anyway, so there isn't much harm you can do as long as you have the critical information backed up. Know what size you expect the disk to be and confirm that it matches what you see in the partition software (or at least comes close). Decide what you would like to put on the disk if everything goes well, Windows, Debian, or something else, and have the needed install software available. Good luck.
    ---
    Verifying of md5 checksum and burning a CD at slow speed are important.

  6. #16
    Senior Member registered user
    Join Date
    Oct 2003
    Location
    N42.41 W73 and change
    Posts
    401
    Once you've salvaged what you can from the disk, why not pop in a knoppix cd and : dd if=/dev/zero of=/dev/hdx (replace x with the hd as knoppix sees it). I will take a long time , over an hour most likely, but you will have ERASED EVERYTHING ON THE DISK, or more specifically written 0's over the entire disk. Then start from scratch - new partitions etc.. If the drive is going bad - you might hear clicking noises - trash it.

    HTH

  7. #17
    Junior Member
    Join Date
    Jun 2006
    Posts
    9
    Good advice, Harry and Rusty I thank you both and I'll keep everyone posted

Page 2 of 2 FirstFirst 12

Similar Threads

  1. Hard disk problem ... or a worm?
    By asearle in forum General Support
    Replies: 3
    Last Post: 08-03-2005, 10:30 AM
  2. removing X completely
    By florin in forum Customising & Remastering
    Replies: 0
    Last Post: 03-07-2005, 02:11 AM
  3. Removing Windows
    By chrisjrn in forum Hdd Install / Debian / Apt
    Replies: 12
    Last Post: 05-07-2004, 06:02 AM
  4. Removing X11
    By technoronin in forum Customising & Remastering
    Replies: 2
    Last Post: 04-19-2004, 01:36 AM
  5. Removing without removing dependencies also
    By eric2 in forum Hdd Install / Debian / Apt
    Replies: 0
    Last Post: 01-25-2004, 11:36 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Cisco Systems NCS2K-20-SMRFS-L optical multiplexor CISCO EXCESS picture

Cisco Systems NCS2K-20-SMRFS-L optical multiplexor CISCO EXCESS

$3599.00



Cisco RV320 Dual WAN VPN 4 Port Gigabit Router w/ Web Filtering RV320-WB-K9-NA picture

Cisco RV320 Dual WAN VPN 4 Port Gigabit Router w/ Web Filtering RV320-WB-K9-NA

$374.00



Cisco 1100 Terminal - gateway - rack-mountable C1100TGX-1N24P32A picture

Cisco 1100 Terminal - gateway - rack-mountable C1100TGX-1N24P32A

$1349.00



Cisco SG110 24 Port Gigabit Ethernet Switch w/ 2 x SFP SG110-24 picture

Cisco SG110 24 Port Gigabit Ethernet Switch w/ 2 x SFP SG110-24

$117.00



Cisco WS-C3850-48P-L 48-Port Gigabit 3850 PoE Switch w/ 715W+ C3850-NM-4-1G Mod picture

Cisco WS-C3850-48P-L 48-Port Gigabit 3850 PoE Switch w/ 715W+ C3850-NM-4-1G Mod

$83.00



Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850 picture

Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850

$38.99



Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03  picture

Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03

$8.00



Cisco Catalyst WS-C2960-48TT-L V02 48 Port Fast Ethernet Switch picture

Cisco Catalyst WS-C2960-48TT-L V02 48 Port Fast Ethernet Switch

$34.00



New Cisco C9200-NM-4X Catalyst 9200 Series Network Module 4 X 10GE *MINT* picture

New Cisco C9200-NM-4X Catalyst 9200 Series Network Module 4 X 10GE *MINT*

$429.97



UNCLAIMED Cisco Meraki MS120-24P-HW - 24Ports Ethernet PoE Switch  Same Day Ship picture

UNCLAIMED Cisco Meraki MS120-24P-HW - 24Ports Ethernet PoE Switch Same Day Ship

$315.00