I am somewhat pressed for time (about to board plane) will just point you to these links
http://www.knoppix.net/forum/viewtop...hlight=windows
http://www.knoppix.net/docs/index.php/FaqSambaQuick
Hi, my windows XP installation has crashed on a laptop. I'd like to copy all the information off the laptop on to my desktop prior to reinstalling the OS, unfortunately I can't even boot in to XP on the laptop.
I can see the partition and files when I boot using Knoppix, I can connect to the internet through the router (Linksys RT31P2), the desktop is connected to the same router. I can ping XP from Knoppix, I can not ping Knoppix from XP. The router is configured as a DHCP server.
Can I copy the entire contents of the laptop (now booted in Linux) to a folder on the desktop (Win XP)? Can I map the drive on the linux machine using XP?
How should I do this?
Thanks, John
I am somewhat pressed for time (about to board plane) will just point you to these links
http://www.knoppix.net/forum/viewtop...hlight=windows
http://www.knoppix.net/docs/index.php/FaqSambaQuick
Two comments
1) if the desktop is XP home (a fat32 file system,) you can do the transfer using knoppix CD's on both ends and avoid the samba configuration.
2) Google "forensic" type "copies". You can zip and send an entire partition over a network and unzip it into an empty partition on the desktop and then salvage, take it apart and|or recover with partition or file recovery tools at will.
The default file system for XP home is NTFS. While it will also support fat file systems, it is very rare to find someone who installed it this way, and it never comes pre-installed this way.Originally Posted by rcook
---
Verifying of md5 checksum and burning a CD at slow speed are important.
Thank you for all the replies.
I have managed to start the copy process. I did the following:
- turn off windows firewall
- allow write access to 'everyone' to a specific share on the windows machine
- used KNetAttach under Internet to map the shared folder
- then just used Knoppix to copy the files, it is still copying but is working, transfer rate is OK but not great. It sat idle for quite a while asking if I wanted to skip a tmp file that windows had left open
HP ProLiant DL360 G9 Server | 2 x E5-2660V3 2.6Ghz | 64GB | 2 x 900GB SAS HDD
$339.00
Dell Poweredge R640 Server | 2x Xeon Gold 6132 | 128GB | H730P | 8x HDD Trays
$1849.00
H261-Z61 2U 24SFF AMD Server 8x EPYC 7551 256-Cores 256GB RAM 8x25G NIC 2x2200W
$2612.18
CSE-118 Supermicro 1U GPU Server 2.6Ghz 28-C 128GB 2x Nvidia K40 GPU 2x1600W PSU
$580.03
DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45
$274.00
HP Proliant DL360 Gen9 28 Core SFF Server 2X E5-2680 V4 16GB RAM P440ar No HDD
$196.95
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
1U Server (6-8 VM's) Vsphere VPS Short Depth 20" XEON 3.5Ghz 32GB RAM X10SLM-F
$199.00
Supermicro 2U X11DPU 2x Xeon Gold 6132 2.6GHz / 128gb / 12x Trays / S3108L-H8ir
$749.99